Page 1 of 1

the next AX keytar

Posted: 01:33, 5 October 2013
by sixfeetunder
If you're listening, Roland manufacturer...
Take what you've learned on the previous models, what works, what doesn't, what people like:
a) 4 octaves minimum, 5 would bring the instrument respect, anything less puts it in "novelty" or "toy" or "right hand solo only" category.
b) use more keyboard/synth sounds onboard and fewer guitar sounds. most of us have guitar players in our bands, and guitar sounds from a keytar are rarely as good as the real thing. The world is full of eager guitar players.
c) like on the Lucina, put the controls in front of the music keys, its faster and easier to see.
d) should look more like AX-Synth and less like Lucina. The "handle" on Lucina is just an ugly design. move the pitch bender out on a neck.
e) tilt the keys slightly toward the user, so we don't have to lean over when looking for a note. let us stay upright and cool.
f) when you do the above, the body becomes slightly wedge shape with the fat side toward the floor. stuff all the guts under there to minimize the width from front to back of keys. skinny keytars always look cooler, fat keytars look like something hung around your neck as an afterthought.
g) put real strap locks on it. many of us have launched our keyboards during our on-stage moves.
h) Don't let another manufacturer steal your lead in Keytars. Bring this to market ASAP.

I have my wallet open for this next great Roland keytar....

Re: the next AX keytar

Posted: 12:52, 10 February 2014
by gerry535
I totally agreed!
Roland please make it happen!

Re: the next AX keytar

Posted: 23:00, 24 July 2016
by sixfeetunder
Looking at Roland release history (Junos, Fantoms, Jupiters...), Models seem to get a refresh every 3 to 7 years. Does this mean a new AX Keytar by 2017?

Re: the next AX keytar

Posted: 23:56, 18 September 2016
by sixfeetunder
They could even trim off 4 lbs, and one octave from the JunoDS 61, and re-package that as the next keytar...
Come on, Roland. It can't be that difficult... :-)

Re: the next AX keytar

Posted: 23:20, 30 March 2020
by sixfeetunder
Well, we got some good synth engine and control improvements with the AX-Edge. But Roland still fell short on designing an ergonomic and comfortable keyboard. Someday, when its well depreciated, i may cut mine up and rebuild it the way I envision it.

Re: the next AX keytar

Posted: 04:24, 31 March 2020
by Tom Williams
All I want right now is something Roland can deliver without changing a bit of firmware or hardware: A PC-based editor for the AX-Edge. By far its weakest point.

Re: the next AX keytar

Posted: 00:38, 3 December 2020
by sixfeetunder
Yes, I'm pleased to see that the AX-EDGE accomplished items a, b, d, e, and f from my list above. Thank You Roland!

Re: the next AX keytar

Posted: 00:39, 3 December 2020
by sixfeetunder
Tom Williams wrote:All I want right now is something Roland can deliver without changing a bit of firmware or hardware: A PC-based editor for the AX-Edge. By far its weakest point.
Tom, did they ever release a PC based editor?

Re: the next AX keytar

Posted: 00:42, 3 December 2020
by sixfeetunder
sixfeetunder wrote:Well, we got some good synth engine and control improvements with the AX-Edge. But Roland still fell short on designing an ergonomic and comfortable keyboard. Someday, when its well depreciated, i may cut mine up and rebuild it the way I envision it.
Here's my first simple conversion of a keyboard into a keytar by adding strap-posts: https://www.youtube.com/watch?v=I7YHznSAEYY

Re: the next AX keytar

Posted: 00:44, 17 September 2023
by RickyDee
Just to counter sixfeetunder's request for a bigger, heavier, longer instrument by adding another octave, I'd like to see an easier to handle and carry smaller, lighter, shorter version of the AX with only 39 keys (yes, for right hand only play). If the Korg had full-sized keys, it would have made a great choice for me but it doesn't so it isn't. Your other keyboards have 60, 76, and 88 key versions. Why can't the AX have a 37, 49, and 61 key version? I understand that some of the control layout would need to be altered for the shorter version.