Page 1 of 1
AX-7 Turns off Master FX on Korg Triton Studio
Posted: 23:15, 26 June 2014
by bigfootjim
I have an AX-7 that I'm using with a Korg Triton Studio. When I change patches on the AX-7 it puts a "check" in the "Master FX Off" box on the Triton (which shots off my master FX). It seems like the AX-7 is sending a CC94( Effects 4 Depth) message when I change the AX-7 Programs. If I disable the "Control Change" on the Global Midi screen on the Triton this doesn't happen. Any ideas? Thanks!
Re: AX-7 Turns off Master FX on Korg Triton Studio
Posted: 20:42, 18 December 2014
by synthesizerplayer
Hi
Did you try the AX Editor? You may be able to change the Midi Transmit settings in there.
SP
Re: AX-7 Turns off Master FX on Korg Triton Studio
Posted: 10:41, 21 July 2022
by kiskadar69
With each AX-7 patch you use, you must do the following:
1. Select the Patch.
2. Set the DELAY parameter in both the Upper and Lower sections to OFF.
3. Store the settings in the same Patch memory from which you loaded it.