AX-7 Turns off Master FX on Korg Triton Studio
-
- Posts: 2
- Joined: 02:44, 1 February 2013
AX-7 Turns off Master FX on Korg Triton Studio
I have an AX-7 that I'm using with a Korg Triton Studio. When I change patches on the AX-7 it puts a "check" in the "Master FX Off" box on the Triton (which shots off my master FX). It seems like the AX-7 is sending a CC94( Effects 4 Depth) message when I change the AX-7 Programs. If I disable the "Control Change" on the Global Midi screen on the Triton this doesn't happen. Any ideas? Thanks!
-
- Posts: 24
- Joined: 17:13, 10 December 2014
- Location: Canada
- Contact:
Re: AX-7 Turns off Master FX on Korg Triton Studio
Hi
Did you try the AX Editor? You may be able to change the Midi Transmit settings in there.
SP
Did you try the AX Editor? You may be able to change the Midi Transmit settings in there.
SP
-
- Posts: 47
- Joined: 06:09, 16 July 2022
Re: AX-7 Turns off Master FX on Korg Triton Studio
With each AX-7 patch you use, you must do the following:
1. Select the Patch.
2. Set the DELAY parameter in both the Upper and Lower sections to OFF.
3. Store the settings in the same Patch memory from which you loaded it.
1. Select the Patch.
2. Set the DELAY parameter in both the Upper and Lower sections to OFF.
3. Store the settings in the same Patch memory from which you loaded it.