AX-7 Turns off Master FX on Korg Triton Studio

Forum for AX series synths and keytars and all things for those who love that "on the shoulder" look.
Post Reply
bigfootjim
Posts: 2
Joined: 02:44, 1 February 2013

AX-7 Turns off Master FX on Korg Triton Studio

Post by bigfootjim »

I have an AX-7 that I'm using with a Korg Triton Studio. When I change patches on the AX-7 it puts a "check" in the "Master FX Off" box on the Triton (which shots off my master FX). It seems like the AX-7 is sending a CC94( Effects 4 Depth) message when I change the AX-7 Programs. If I disable the "Control Change" on the Global Midi screen on the Triton this doesn't happen. Any ideas? Thanks!
synthesizerplayer
Posts: 24
Joined: 17:13, 10 December 2014
Location: Canada
Contact:

Re: AX-7 Turns off Master FX on Korg Triton Studio

Post by synthesizerplayer »

Hi

Did you try the AX Editor? You may be able to change the Midi Transmit settings in there.

SP
kiskadar69
Posts: 42
Joined: 06:09, 16 July 2022

Re: AX-7 Turns off Master FX on Korg Triton Studio

Post by kiskadar69 »

With each AX-7 patch you use, you must do the following:
1. Select the Patch.
2. Set the DELAY parameter in both the Upper and Lower sections to OFF.
3. Store the settings in the same Patch memory from which you loaded it.
Post Reply