Roland Clan Forums

I'm ready to use a real keyboard with my ipad synths. Is the Line 6 MIDI Mobilizer still a good way to do this, or are there other/better options that I don't know about?

Thanks,
Rodan

If you have a keyboard with a USB port, and it doesn't require a software driver, you can connect it via a USB adaptor in the camera connection kit. I.e. no need for the Line6 cable.

Thanks, Artemiy. I do have the camera connection kit, but at this point, only two Roland keyboards (Fantom X and V-Synth), so I guess I'm out of luck.

Is FantomX compatible with iPad for USB MIDI?

No.. The Fantom x uses a USB driver... You can however buy the line 6 thing or the maudio UNO to use as midi to USB converter

Almost any USB to MIDI cable that does not require a driver should work. I use a no-name purchased at Best-Buy.

See this thread.

piaknowguy wrote:See this thread.

Nice Piaknow !!!
Are you using the Camera Connection Kit and the USB/MIDI cable for that?

Cheers,
Paulo

Thanks, PauloF.

Yes.

piaknowguy wrote:Thanks, PauloF.

Yes.

One like those, I presume... ;-)

I'm trying to connect my Gaia to the iPad and it says it is not compatible...I guess I'm going to need a USB-MIDI cable.
Anybody with the same problem?

Thank you!

IgorCristo wrote:I'm trying to connect my Gaia to the iPad and it says it is not compatible...I guess I'm going to need a USB-MIDI cable.
Anybody with the same problem?

Thank you!

Yes Igor,
The same applies to ALL Roland (and Korg too, for that matter), as they need a proprietary USB driver. Unless Roland releases drivers for iPads, you will have to use a solution like the one Piaknowguy mentioned.

Abs,
Paulo

I guess I'll pass my Gaia SH-01 then.....
I'm thinking about the Arturia 49 keys controller, so I can get the software also! =)

It's kind of hard to do business with this in Brazil, but I'll try! Thank you for helping me.

IgorCristo wrote:I guess I'll pass my Gaia SH-01 then.....
I'm thinking about the Arturia 49 keys controller, so I can get the software also! =)

It's kind of hard to do business with this in Brazil, but I'll try! Thank you for helping me.

Depending on the price in Brazil, consider the Akai pro MPK25 or MPK49 as they use standard USB drivers too.

;-)

Hy guys,
Just to tell you that I managed to get the iPad2 + camera connection kit to work with all Roland keyboards I own, using a Roland MIDI/ USB interface ;-)

I just used the UM-2EX in standard mode driver (doesn't work if set for advanced driver), connected to the camera connection kit and one midi cable from thr UM-2EX MIDI IN to the PCR, A-PRO, Fantom, whatever...

Cool!!!

I'll be testing the UM-550 and the UM-3EX tonight, as maybe they also work :-0