Anyone know if and how this could be done?
Thanks
Can one convert .bin to .svd
Re: Can one convert .bin to .svd
it's easy
first load your commercial soundset from usb stick as it described in pdf file.
then export ( save) all yours user patches into usb stick as it described in page 56 of GAIA Manual
at the end you will see that new saved file is in .svd format
first load your commercial soundset from usb stick as it described in pdf file.
then export ( save) all yours user patches into usb stick as it described in page 56 of GAIA Manual
at the end you will see that new saved file is in .svd format
Re: Can one convert .bin to .svd
Thanks for your help...here is a bit more info
I think the easiest way is to restore the bin backup on your GAIA (manual page 57), and then copy all patches to the memory stick (manual page 56)? Grauw
That's exactly it, you do the same procedure as when backing up all the parameters but you only press the tone copy button to get the .svd. JefCostello
Thanks got it with your help.
Experimentation has shown that the file must be extact in its naming structure:
for example SH01_PAT-1.BIN would not work whereas
SH01_PAT.BIN did work after editing the name. Oxygen
I think the easiest way is to restore the bin backup on your GAIA (manual page 57), and then copy all patches to the memory stick (manual page 56)? Grauw
That's exactly it, you do the same procedure as when backing up all the parameters but you only press the tone copy button to get the .svd. JefCostello
Thanks got it with your help.
Experimentation has shown that the file must be extact in its naming structure:
for example SH01_PAT-1.BIN would not work whereas
SH01_PAT.BIN did work after editing the name. Oxygen
-
- Posts: 256
- Joined: 18:43, 26 May 2008
Re: Can one convert .bin to .svd
I can't put my SH01_BUP.BIN inside my Gaia... why????????
Everytime I try to do this it loads and then lits the 2,4,6 and 8 buttons and the shift-cancel button starts to blink.
What is wrong??
Waiting for some HELP!
Thanks!
Everytime I try to do this it loads and then lits the 2,4,6 and 8 buttons and the shift-cancel button starts to blink.
What is wrong??
Waiting for some HELP!
Thanks!
-
- Posts: 256
- Joined: 18:43, 26 May 2008
Re: Can one convert .bin to .svd
Did it!! I was doing it wrong! =D
- donutninja
- Posts: 178
- Joined: 07:43, 19 November 2007
- Location: Columbus, OH USA
Re: Can one convert .bin to .svd
What were you doing wrong? I'm having the same problem.
-
- Posts: 256
- Joined: 18:43, 26 May 2008
Re: Can one convert .bin to .svd
You have two pages in the manual that covers this topic. Page 56 and 57. There you can see how to make things right.
In page 56 it teaches you how to save and load the .SVD files.
In page 57 it teaches you how to save and load the .BIN files.
That's it... if you do the opposite you get an error.
Hope this helps you!
In page 56 it teaches you how to save and load the .SVD files.
In page 57 it teaches you how to save and load the .BIN files.
That's it... if you do the opposite you get an error.
Hope this helps you!