Juno Gi moving user LIVE SETS to new user location

[LENCRAWLEY]

Does anyone know if it's possible to mover user Live sets to a different location or copy user live sets
so as you have 2 or 3 of the same but in different locations

many thanks for any help
Len C

[tnicoson]

Len

Unlike the Jupiters, the Juno-Gi UTILITY set does not include a LiveSet copy, move, or initialize feature, but not to worry, there are very simple workarounds. If you want to copy a LiveSet to a new location, just select the LiveSet you want to copy as though you are going to play it. Press the WRITE button, which brings up the naming screen. Unless you want to rename the LiveSet as you move it, just press Button 6 (NEXT). On the LIVE SET WRITE screen, select the User location you want to copy it to and press Button 6 (WRITE). On the confirmation screen, press Button 5 (EXEC). You now have a copy of the original LiveSet now in the original location and the new location. Repeat this for each copy you want. If you want to erase a LiveSet, use a similar procedure. Select any empty LiveSet (INIT LIVE). Press the WRITE button. Press Button 6 (NEXT). Select the LiveSet location you want to erase. Press Button 6 (WRITE). Press Button 5 (EXEC). You have now erased (initialized) the LiveSet at that location.

Any questions, give a shout.

Good luck !

Regards,

Ted

[LENCRAWLEY]

Thanks Ted for your help & advice, much appreciated
Len