New Demos at Roland.US

Forum for JUPITER-80

Re: New Demos at Roland.US

Postby jabberwocky » 14:11, 19 August 2011

mm , that is not what it says in the parameter descriptions & midi implementation sheet of the jupiter 80 ??

You are saying that you have for each part in a live set a seperate keyboard range setting ?
1) keyboard range lower part 1
2) keyboard range upper part 1
3) keyboard range lower part 2
4) keyboard range upper part 2
5) keyboard range lower part 3
6) keyboard range upper part 3
7) keyboard range lower part 4
8) keyboard range upper part 4

and the 4 keyboard zones in the registration are overwriting these ?
jabberwocky
 
Posts: 585
Joined: 15:55, 30 March 2004


Re: New Demos at Roland.US

Postby Devnor » 17:05, 19 August 2011

Keyboard range is programmed per TONE at the registration level.
Devnor
 
Posts: 552
Joined: 20:22, 27 September 2010

Re: New Demos at Roland.US

Postby Mystic38 » 17:18, 19 August 2011

Without using the split function the following applies..

Within each live set there are four tones, each with its own keyboard range.. so conceptually this is same way of setting up split & layer as Fantom G... SO, add 2 live sets to solo and perc parts and you have 10 tones with independent keyboard ranges (read split/layer).

Press split and the incoming notes to those live sets are filtered by the split point(s) as desired.. do not press split and the splits/layers setup in the live sets will be used... so 10 tones layered/split however you want, or overridden by the split points.. quite flexible.

Its not well explained in videos and certainly not in the manual, but from a left hand/right hand perspective i think its a more flexible way than FG...

jabberwocky wrote:mm , that is not what it says in the parameter descriptions & midi implementation sheet of the jupiter 80 ??

You are saying that you have for each part in a live set a seperate keyboard range setting ?
1) keyboard range lower part 1
2) keyboard range upper part 1
3) keyboard range lower part 2
4) keyboard range upper part 2
5) keyboard range lower part 3
6) keyboard range upper part 3
7) keyboard range lower part 4
8) keyboard range upper part 4

and the 4 keyboard zones in the registration are overwriting these ?
Mystic38
 
Posts: 1099
Joined: 14:04, 24 August 2009

Re: New Demos at Roland.US

Postby mojkarma » 18:37, 19 August 2011

Devnor wrote:Keyboard range is programmed per TONE at the registration level.


Unfortunately no, and that is where quite a lot of users get confused. Keyboard range is NOT programmed per tone at the registration level. At the registration level you set split points for four parts: perc, lower live set, upper live set and solo.
Further split points CAN be set at a level deeper, that is the live set level where you can set further splits between up to 4 live set parts.
mojkarma
 
Posts: 614
Joined: 23:59, 8 August 2009
Location: Varaždin, HR

Re: New Demos at Roland.US

Postby Devnor » 19:00, 19 August 2011

Yep you're right.
Devnor
 
Posts: 552
Joined: 20:22, 27 September 2010

Previous

Return to JUPITER-80

Who is online

Users browsing this forum: No registered users and 4 guests