VR 760 - V Combo - Key Transpose

Roland gear made before year 2000
Post Reply
reder
Posts: 110
Joined: 14:07, 7 October 2008

VR 760 - V Combo - Key Transpose

Post by reder »

hi, I have a Roland VR 760 - V Combo ...
I need to lower the tone a few tracks that I play, but in the performance I saved, I find that I can make no change in my bank performance ...
In practice, the key transpose, I can only enable only in EDIT - SYSTEM BASIC ...
My question is if there is some other way to make me step in and change the key transpose into my bank .... thanks
kiskadar69
Posts: 42
Joined: 06:09, 16 July 2022

Re: VR 760 - V Combo - Key Transpose

Post by kiskadar69 »

Chromatic transposition cannot be saved in the VR-760 registers.
As a workaround, if you could program the following SysEx messages onto the pads of an external MIDI controller (e.g. Edirol by Roland PCR-300/PCR-500/PCR-800, Roland A-300PRO/A-500PRO/A-800PRO) and connect the MIDI Out of the controller to the MIDI In of the VR-760, you could transpose the VR-760 in one go:
-6 semitones: F0 41 10 00 5F 12 00 00 00 04 3A 42 F7
-5 semitones: F0 41 10 00 5F 12 00 00 00 04 3B 41 F7
-4 semitones: F0 41 10 00 5F 12 00 00 00 04 3C 40 F7
-3 semitones: F0 41 10 00 5F 12 00 00 00 04 3D 3F F7
-2 semitones: F0 41 10 00 5F 12 00 00 00 04 3E 3E F7
-1 semitone: F0 41 10 00 5F 12 00 00 00 04 3F 3D F7
No transpose: F0 41 10 00 5F 12 00 00 00 04 40 3C F7
+1 semitone: F0 41 10 00 5F 12 00 00 00 04 41 3B F7
+2 semitones: F0 41 10 00 5F 12 00 00 00 04 42 3A F7
+3 semitones: F0 41 10 00 5F 12 00 00 00 04 43 39 F7
+4 semitones: F0 41 10 00 5F 12 00 00 00 04 44 38 F7
+5 semitones: F0 41 10 00 5F 12 00 00 00 04 45 37 F7

For these SysEx messages to work, the "Device ID" in the "System MIDI" menu of the Roland VR-760 must be set to 17.
Post Reply