I had an E on my SH-2 keyboard triggering multiple times per press so I took the keyboard apart and had a look. After playing with the metal key contacts underneath the key, it seemed that they were working just fine (manually touching them to the metal "bars" beneath the keys caused a solid note to sound). It occurred to me that the rubber bushing on the bottom of the key had perhaps shrunk over time. Pressing the key causes the metal key contacts to touch the bars (presumably CV and gate) but only very lightly. This leaves them open for bouncing or poor contact even when the key is fully depressed.
To fix this, I removed the rubber bushing (mine was friction fit - no glue) and wadded just a very small bit of paper in the bottom of the hole to supply a bit of extra distance for the rubber bushing. This way it makes contact with the metal key contacts sooner and holds them to the bars with more pressure.
This was a super simple fix, though I would advise anyone attempting this to be gentle with the keyboard. the key contacts on the underside are somewhat fragile so you don't want to accidentally bump them hard while working on this.
I've included a horrible microsoft paint diagram below:
I haven't seen much about repairing old Roland CV keyboards on the internet, so I wanted to post about this briefly. I'm willing to bet there's a better way to do it, and would appreciate some tips myself, but this may be useful to somebody anyhow :)
How I fixed my SH-2 multiple triggering key
Forum for SH-1, SH-2, SH-09, SH-101 and other SH synthesizers from 1970-1980's
Jump to
- Latest News / Free Zone
- Roland forums
- ↳ Roland Cloud
- ↳ Fantom Platform
- ↳ Fantom-0
- ↳ Jupiter-X/Xm
- ↳ Juno-X
- ↳ GAIA 2
- ↳ MC707 / MC101
- ↳ Zenbeats
- ↳ RD-2000 / RD-88
- ↳ System-8
- ↳ Juno-DS / XPS-30
- ↳ Boutique Synths
- ↳ JD-XA Keyboard
- ↳ JD-Xi Keyboard
- ↳ VR-Combos (VR09, VR730 etc)
- ↳ Fantom-S and Fantom-X
- ↳ FA-06 / FA-07 / FA-08
- ↳ Fantom-G
- ↳ JUPITER-80
- ↳ JUPITER-50
- ↳ Integra 7
- ↳ Aira
- ↳ JUNO-G
- ↳ JUNO-Gi
- ↳ JUNO STAGE
- ↳ JUNO-Di
- ↳ MC-808
- ↳ MV-8000/8800
- ↳ RD-700 / 800 series
- ↳ SH-01
- ↳ SH-201
- ↳ V-Synth
- ↳ SonicCell
- ↳ Classic Roland instruments
- ↳ SH series
- ↳ TR, TB and MC series
- ↳ JUNO, JUPITER and JX
- ↳ D and U series
- ↳ JD, JV, XP and XV series
- ↳ JP-8000/8080
- ↳ Other Roland gear
- ↳ Keytars & AX Synths
- ↳ VP-550, VP-770 and VP-7
- ↳ Grooveboxes
- ↳ Synthesizers and Keyboards
- ↳ Studio Zone
- Community
- ↳ Roland-powered Music
- ↳ Roland Clan site and forum
- ↳ Other languages
- ↳ Deutsch
- ↳ Español
- ↳ Français
- ↳ Italiano
- ↳ Nederlands
- ↳ Português
- ↳ Русский
- Computers and software
- ↳ Mac
- ↳ iPad, iPhone and iPod touch
- ↳ Windows
- Other topics
- ↳ Other gear
- ↳ Marketplace