new or warped tones for d series d10/110

Forum for D-50/550 and other D and U synthesizers from 1980-1990's

new or warped tones for d series d10/110

Postby Charles » 01:13, 24 November 2013

hi yall , whos got some new or warped tones for their d-10/110 yes i do , so if this thread takes off , i can swap/trade for sysex banks of tones no problem


charlie
Charles
 
Posts: 21
Joined: 15:51, 20 March 2007
Location: ontario


Re: new or warped tones for d series d10/110

Postby sizteves » 16:36, 25 November 2014

I'm working on a new set of tones for D10/110/20.

Here is one example, which uses partial 1(3) as an LFO, controlled by the pitch bender. Note that the timbre key transpose is set to -24, and the pitch bender to 24.

https://dl.dropboxusercontent.com/u/21952223/D-10%2B20_Surreorgel_Timbre.mid

Some others:

https://dl.dropboxusercontent.com/u/21952223/D-10%2B20_Noisepad5_timbre.mid
https://dl.dropboxusercontent.com/u/21952223/D-10%2B20_Wobl-Blopp_timbre.mid

The timbres above will load into part 1 in multitimbral mode.
sizteves
 
Posts: 7
Joined: 13:35, 25 November 2014

Re: new or warped tones for d series d10/110

Postby sizteves » 22:36, 28 April 2015

sizteves
 
Posts: 7
Joined: 13:35, 25 November 2014


Return to D and U series

Who is online

Users browsing this forum: No registered users and 1 guest