new or warped tones for d series d10/110

Forum for D-50/550 and other D and U synthesizers from 1980-1990's
Post Reply
Charles
Posts: 21
Joined: 15:51, 20 March 2007
Location: ontario

new or warped tones for d series d10/110

Post by Charles »

hi yall , whos got some new or warped tones for their d-10/110 yes i do , so if this thread takes off , i can swap/trade for sysex banks of tones no problem


charlie
sizteves
Posts: 8
Joined: 13:35, 25 November 2014

Re: new or warped tones for d series d10/110

Post by sizteves »

I'm working on a new set of tones for D10/110/20.

Here is one example, which uses partial 1(3) as an LFO, controlled by the pitch bender. Note that the timbre key transpose is set to -24, and the pitch bender to 24.

https://dl.dropboxusercontent.com/u/219 ... Timbre.mid

Some others:

https://dl.dropboxusercontent.com/u/219 ... timbre.mid
https://dl.dropboxusercontent.com/u/219 ... timbre.mid

The timbres above will load into part 1 in multitimbral mode.
sizteves
Posts: 8
Joined: 13:35, 25 November 2014

Re: new or warped tones for d series d10/110

Post by sizteves »

Post Reply