D-110 volume pot and knob - spare parts required
-
- Posts: 5
- Joined: 19:54, 14 January 2019
D-110 volume pot and knob - spare parts required
I recently acquired (for free!) a fully-working Roland D-110 module. Its volume knob was missing and, on closer inspection, the pot stalk had broken off too. I've contacted Roland US and a UK-based engineer to see if the replacement parts can be sourced. Syntaur sent me a replacement knob but I'm still looking for the pot assembly. If you know of any around, please give me a shout. Cheers.
-
- Posts: 12
- Joined: 18:47, 20 December 2014
Re: D-110 volume pot and knob - spare parts required
Replacing this part on the D‑110 is very easy. It's a "Drop‑In" part and no modifications are needed. Just unsolder the old potentiometer and pop in this replacement. It's a 50K Ohm Dual Gang Logarithmic Taper and is available from Mouser for only $3 (USD)
Mouser P/N: 652-PTD902-2015KA503 --> P/N: LINK
Bournes P/N: PTD902-2015K-A503
I've added some notes about replacing this part at the end of the D-110 Battery Replacement Guide webpage at this link
http://llamamusic.com/d110/d-110_batter ... tml#VOLUME
Mouser P/N: 652-PTD902-2015KA503 --> P/N: LINK
Bournes P/N: PTD902-2015K-A503
I've added some notes about replacing this part at the end of the D-110 Battery Replacement Guide webpage at this link
http://llamamusic.com/d110/d-110_batter ... tml#VOLUME