Friend of my wants to know what can be done to fix a jumpy value knob on the xv 5080?
Sometimes he has to turn the knob 3 times to get the value to change by 1 increment... and then othertimes he turns it once and it changes by 2-3 increments...
He's kinda frustrated by it....
thanks
XV 5080 Jumpy Value Knob
Re: XV 5080 Jumpy Value Knob
read this:
http://www.dancecrave.com/xv5080.htm
I did it and it worked... not an easy task be carefully...
good luck
http://www.dancecrave.com/xv5080.htm
I did it and it worked... not an easy task be carefully...
good luck
Re: XV 5080 Jumpy Value Knob
found that later on... but i DID NOT take that thing apart (in the almost last step)adsoto wrote:read this:
http://www.dancecrave.com/xv5080.htm
I did it and it worked... not an easy task be carefully...
good luck
i was scared to do that part... But it is working for some reason now...
Re: XV 5080 Jumpy Value Knob
apex- if your friend is willing to take it apart, try electric cleaner spray on the dial (potentiometer) from the inside.
ive also had great suceess with pots and sliders (and even scratchy jacks) using a very light coat of WD40.
ive also had great suceess with pots and sliders (and even scratchy jacks) using a very light coat of WD40.