Hello all,
I'm new to this forum so i'm hoping some of you with more experience can help me out. i just bought an old JV-1010 for its portability when i want to travel and take a small setup with me on an airplane. The stock sounds are really awesome but i'd like to see about adding some additional B3 organ patches and a good Wurlitzer patch since none come stock. my unit (used of course on eBay) did not come with any software so if you can help me out with the location(s) of available patches and the proceedure to download and install them that would be great too. thanks for your help.
Steve Windecker
California USA
JV-1010 patches
Re: JV-1010 patches
you have a slot for a SR-JV80 card: use it for a sr-JV-08 "Sound of '60 '70".
http://www.synthmania.com/sr-jv80-08.htm
http://www.synthmania.com/sr-jv80-08.htm
Re: JV-1010 patches
Build it yourself!
3 Patches for the B3 Sounds( 3x 3 sine tones plus click sound) layered in a Performance Patch. Add distortion and Lesley Speaker as FX. The only thing is, that you need external controllers to influence the single sine tones ---> drawbars.
Use the " changeIt!" editor to build the patch.
Have fun!!
tonmanns
3 Patches for the B3 Sounds( 3x 3 sine tones plus click sound) layered in a Performance Patch. Add distortion and Lesley Speaker as FX. The only thing is, that you need external controllers to influence the single sine tones ---> drawbars.
Use the " changeIt!" editor to build the patch.
Have fun!!
tonmanns