jv 30 battery low
jv 30 battery low
when i turned on my jv 30 i got a 'battery low' indicator so i changed the battery on the board but i still get the indicator please help
-
- Posts: 369
- Joined: 04:50, 24 December 2005
- Location: SP - Brazil
Re: jv 30 battery low
do you have a volt-meter to check if the CR2032 battery has 3 volts?
Re: jv 30 battery low
yes checked it i bought it new off the internet
Re: jv 30 battery low
Hopefully you backed up the internal data of the JV30 before changing the battery..
You may need to do a factory redet of the JV30 to clear the low battery warning;
(From Roland's factory reset list)
JV-30 : Press CHORUS and REVERB (above INITIALIZE) simultaneously. Press VALUE UP (^)
You may need to do a factory redet of the JV30 to clear the low battery warning;
(From Roland's factory reset list)
JV-30 : Press CHORUS and REVERB (above INITIALIZE) simultaneously. Press VALUE UP (^)
-
- Posts: 369
- Joined: 04:50, 24 December 2005
- Location: SP - Brazil
Re: jv 30 battery low
another hint: check if the battery holder on JV PCB is clean (I mean, if it has bad electric contact it will prejudice the battery meter).
Re: jv 30 battery low
cleaned the battery holder and done a factory reset low battery indicator still comes on whats left the skip
-
- Posts: 369
- Joined: 04:50, 24 December 2005
- Location: SP - Brazil
Re: jv 30 battery low
So the problem should be on hardware (p.c. board, capacitors, etc).