JD 800 Boot Up Stuck?

Forum for JD, JV, XP and XV synthesizers from 1990's
Post Reply
moshing17
Posts: 2
Joined: 16:44, 23 September 2017

JD 800 Boot Up Stuck?

Post by moshing17 »

Wonder if anyone can shed any light on this? I took my JD apart for its every few yearly clean - something of which I done several times since I got it a few years back (rid red gunk of death, de-fluffing sliders etc.) then all put back to together, no problems.

But on this occasion though I replaced the battery, something I had not done since I bought it. Switched it on, 'intializes y/n' pops up on display, press yes button - nothing.. no response from any thing. Check internal connections, unplugged etc, still nothing. Can't find anything regarding this anywhere.. Help would be very much appreciated thank you.
GearNostalgia
Posts: 1
Joined: 12:16, 2 March 2018

Re: JD 800 Boot Up Stuck?

Post by GearNostalgia »

I wonder the exact same thing, have you found anything out since you posted this question? I was away in the hospital for three weeks, now I got back and turned on my JD800. And it boots up and just shows the name JD800 and all buttons and LEDs are frozen. I can not to anything. So what is wrong?
Post Reply