The XV-3080 only plays 128 sounds from the SRX-09 World Collection Expansion Board

[adamwojcik]

Please help me. I bought the XV-3080 module. I also bought a used SRX-09 World Collection Expansion Board. I have a problem because after installing SRX-09 in the module I can only select 128 sounds from SRX-09. When I try to select the next 129th sound I get the following message on the display: “PATCH XP-E:XXX «No media»”. Is this problem caused by a damaged SRX-09 or the XV-3080 module, or rather by an old version of the operating system in the XV-3080 module? How to check which version of the operating system is installed in the XV-3080 module?

[kiskadar69]

I have uploaded some stuff about the Roland XV-3080 on the following link:
https://drive.google.com/drive/folders/ ... Qnfpfp6Cye

"IDENTIFYING THE VERSION NUMBER
Step 1. Turn on the XV-3080 power.
Step 2. While holding down [EXIT], press [<-] to enter the DEMO mode.
Step 3. Press [VALUE] while holding down [up] and [down] at the same time. The top page in the TEST mode will appear on the display. The version numbers of the CPU and ROM will appear on the display."
(Roland XV-3080 Service Notes)

If your current XV-3080 firmware version is v1.08 or older, you must update the firmware. See the link provided.