Voice Modulator midi transfer to JP8000
Posted: 01:55, 19 February 2012
Hello,
It's been a while.
I'm finding difficulties with voice modulator to respond as musical digital performance data from JP8000 - Which I'm using as a midi controller.
1. I have the midi cable inserted into the Remote Keyboard In with other end jacked into midi out of JP8000.
2. I switch both devices on and execute Factory Reset. I turn devices off and on, for a refresh.
3. I toggle on Voice Mod Switch and then activate Voice Mod Lower / Upper.
4. I then select F.MT.Filter.
5. I toggle the External In button and insert a mono mic.
6. I deactivate Local in JP8000.
7. I set midi channels for the Upper / Lower in both devices - Midi data linkage.
8. I set Midi Sync on, for midi external clock (JP8080).
9. Tx / Rx Edit _ Rx Exclusive _ Tx Rx Prog - Activated in JP8080.
Now, when I INC volume on JP8080 and trigger any of the Lower / Upper keys on JP8000, there is no sound at all.
Only when I switch the Voice Mod button off, sound waves gate thru. Therefore, musical performance data is signaled, however not when Voice Mod is activated.
I have checked the mic and is working thru other outboard gear.
Either I'm making an error with parameter settings / midi connection or possibly there is a diagnostic issue with Voice Mod Generator.
I really need to get this going for a track I'm developing.
Help with this matter appreciated.
It's been a while.
I'm finding difficulties with voice modulator to respond as musical digital performance data from JP8000 - Which I'm using as a midi controller.
1. I have the midi cable inserted into the Remote Keyboard In with other end jacked into midi out of JP8000.
2. I switch both devices on and execute Factory Reset. I turn devices off and on, for a refresh.
3. I toggle on Voice Mod Switch and then activate Voice Mod Lower / Upper.
4. I then select F.MT.Filter.
5. I toggle the External In button and insert a mono mic.
6. I deactivate Local in JP8000.
7. I set midi channels for the Upper / Lower in both devices - Midi data linkage.
8. I set Midi Sync on, for midi external clock (JP8080).
9. Tx / Rx Edit _ Rx Exclusive _ Tx Rx Prog - Activated in JP8080.
Now, when I INC volume on JP8080 and trigger any of the Lower / Upper keys on JP8000, there is no sound at all.
Only when I switch the Voice Mod button off, sound waves gate thru. Therefore, musical performance data is signaled, however not when Voice Mod is activated.
I have checked the mic and is working thru other outboard gear.
Either I'm making an error with parameter settings / midi connection or possibly there is a diagnostic issue with Voice Mod Generator.
I really need to get this going for a track I'm developing.
Help with this matter appreciated.