Well, my operating system is OS X 10.11. I've installed the latest driver and have set INTEGTA-7 to Vender mode. My keyboard conneted to the INTEGRA with 5-pin MIDI cable, and USB Midi Thru was on.
I created an external Instrument channel linked to INTEGRA, and an Instrument channel for INTEGRA AU plugin Editor Ver2. At first, it runs well. Several minutes later, the Mainstage3 just frozen. I force quitted Mainstage and restart it, then I saw this:
I clicked the INTEGRA Editor interface (it was blank on that time), and I saw these:
Sometimes restart will solve the problem, but it may crash again like I mentioned above. So how can I fix it?
Sorry for my poor English…
I got a problem using INTEGRA-7 with Mainstage3
Re: I got a problem using INTEGRA-7 with Mainstage3
it is a problem with the AU sound editor.
I use the I-7 as an external instrument on my Mainstage concert and works great. I, however, send MSB; LSB; PC messages to change sounds on the I-7 from mainstage instead of using the editor as it is very unreliable.
Heres a little tip to have easy access to the bank and Program changes on your Integra 7 for the sounds you're trying to switch from mainstage:
Turn on your i-7 press twice the "part view " button, if you did this OK you're gonna access a different type of part view layout, this layout contains MSL, LSB and PC info for the selected patch on that channel- (see image attached) Then you can put that info on your mainstage patch (image attached) Bear in mind that I put 74 in Mainstage instead of 75 as my program change cause Mainstage sees PC=0 as 1.
I use the I-7 as an external instrument on my Mainstage concert and works great. I, however, send MSB; LSB; PC messages to change sounds on the I-7 from mainstage instead of using the editor as it is very unreliable.
Heres a little tip to have easy access to the bank and Program changes on your Integra 7 for the sounds you're trying to switch from mainstage:
Turn on your i-7 press twice the "part view " button, if you did this OK you're gonna access a different type of part view layout, this layout contains MSL, LSB and PC info for the selected patch on that channel- (see image attached) Then you can put that info on your mainstage patch (image attached) Bear in mind that I put 74 in Mainstage instead of 75 as my program change cause Mainstage sees PC=0 as 1.