Page 1 of 1

Altering tempo of loops from a DAW

Posted: 00:06, 18 January 2017
by funkycornwall
I've been trying to alter the tempo of various loops from the SRX Ultimate Dance and Platinum Trax via my DAW (REAPER) but no success. I've changed the system settings in the Integra so that it operates as a slave. Seems that all the loops are playing at 120 bpm even when some of them should be at different tempo to that. Changing the tempo setting of the DAW does not affect the loop speed. Has anyone any ideas about how to achieve this?

Many thanks for any ideas.

Re: Altering tempo of loops from a DAW

Posted: 06:11, 18 January 2017
by LA Keys
You have to turn ON "Wave Tempo Sync".
This is on the "wave" tab of the "Tone Edit (PCMS)" screen.

(See also the Integra 7 parameters manual at page 50)

LA

Re: Altering tempo of loops from a DAW

Posted: 20:06, 18 January 2017
by funkycornwall
Thanks for your help. I have tried changing the tempo of 'Secret Dancer' which was set at 120. However I discovered that using the K-Take Sound Editor if you go into the System you can navigate to sync/tempo and if you change the system tempo to for example to 130 then the drum loop speeds up to 130. This actually solves my issue quite neatly.

However I noticed there is a Wave Form list for each SRX and I couldn't find a way to navigate to those sounds. In SRX-5 there are 818 wave forms listed. I can navigate all the other sounds and patch lists fine.

Thanks again for your help