limiting play to just 1 midi channel

Forum for Integra 7

limiting play to just 1 midi channel

Postby shawnsbrain66 » 17:54, 9 May 2017

I'm using an iOS app called imidipatchbay to control my Integra 7 (and also Yamaha motif rack).
Anyway, I have the Integra 7 set to receive patch changes on midi channel 16.
My patch changes work, but there is also data showing on midi ch 1 and midi ch 15??
So I'll end up with the patch I want on ch 16, plus whatever is on midi ch1 or whatever.
I don't quite understand how this is happening.
How can I turn off all the other midi channels on the Integra 7 except for 16?
shawnsbrain66
 
Posts: 2
Joined: 19:32, 14 April 2017


Re: limiting play to just 1 midi channel

Postby LA Keys » 07:31, 10 May 2017

You cannot turn off a midi channel from the Integra, this is done from your controller (Your iOS app in this case) but you can make the I-7 to stop responding to any channel you want.

For that you will either make sure none of the 16 parts is assigned to the channel you want to "turn off" or you will turn off the RX switch of any parts assigned to that channel. (By default part 1 is assigned to ch 1 up to part 16 assigned to ch 16)

To do this go to the "Part View" screen (Press "part view" button (see p 30 of the manual)). From there either change the channel or turn off the RX switch (identified as 'Sw') for any channel you want.

LA
User avatar
LA Keys
 
Posts: 251
Joined: 05:59, 22 July 2014
Location: LA

Re: limiting play to just 1 midi channel

Postby shawnsbrain66 » 15:48, 11 May 2017

that was helpful. thanks
shawnsbrain66
 
Posts: 2
Joined: 19:32, 14 April 2017


Return to Integra 7

Who is online

Users browsing this forum: No registered users and 2 guests