Hi there,
i'm trying to switch between presets on my Integra without change Studio Set on channel n.4 (i can't switch to another channel on the fly from my midi controller). I came from a SN-A USER sound (based on violin 1) and I want to load a SN-S PRST sound (n.32 vintage 2). They are 2 really different sounds... If I send MSD 95 LSB 64 PC 32 Integra loads an user preset that has the same SMB LSB PC values...
I made sever tests and I found out that is impossible to sent SMB-LSB-PC data from another controller and switch between sounds located on different banks... at least I can understand how...
Do you have any suggestion for this scenario?
Thanks!
Gekomax
same MSB-LSB e PC for sounds on different banks???
Re: same MSB-LSB e PC for sounds on different banks???
Hi Gekomax
Bank Select MSB 95 LSB 64 is the correct command to switch to the first SN-S Preset Bank (Tones 1-128). Please describe the complete "syntax" of the Bank Select commands you send to the Integra. It should be "Control Change 0 + Value" for the Bank Select MSB and "Control Change 32 + Value" for the Bank Select LSB.
Best regards, hobbit
Bank Select MSB 95 LSB 64 is the correct command to switch to the first SN-S Preset Bank (Tones 1-128). Please describe the complete "syntax" of the Bank Select commands you send to the Integra. It should be "Control Change 0 + Value" for the Bank Select MSB and "Control Change 32 + Value" for the Bank Select LSB.
Best regards, hobbit