FA Editor

Forum for Roland FA-06/08

FA Editor

Postby alphaC » 10:22, 24 March 2014

Are Roland going to release an PC editor ?
alphaC
 
Posts: 79
Joined: 20:28, 26 May 2013


Re: FA Editor

Postby Quinnx. » 11:02, 24 March 2014

Nope!
User avatar
Quinnx.
 
Posts: 3437
Joined: 11:28, 13 January 2005
Location: HomeTown Ireland: Current Location USA

Re: FA Editor

Postby Candy » 18:27, 24 March 2014

There is an interesting editor for the Integra, hope the programmer will also built one for the FA!

http://synth-voice.sakura.ne.jp/Integra-7_Sound_Editor_english.html
User avatar
Candy
 
Posts: 197
Joined: 06:30, 15 November 2008

Re: FA Editor

Postby Devnor » 02:06, 25 March 2014

No
Devnor
 
Posts: 555
Joined: 20:22, 27 September 2010

Re: FA Editor

Postby ABGgd » 04:34, 25 March 2014

Has anyone tried the Integra editor to see if recognizes the FA?
ABGgd
 
Posts: 26
Joined: 00:39, 1 February 2014

Re: FA Editor

Postby Candy » 05:01, 25 March 2014

Yes I did. I don't know, if I made something wrong, but it didn't work!

Candy
User avatar
Candy
 
Posts: 197
Joined: 06:30, 15 November 2008

Re: FA Editor

Postby ABGgd » 13:58, 25 March 2014

I'm not surprised, really. It probably checks the device signature and sees that it's not an Integra. But if the programming interface of the both machines are mostly the same, then it shouldn't be hard for Roland to make the Integra editor work with the FA.
ABGgd
 
Posts: 26
Joined: 00:39, 1 February 2014

Re: FA Editor

Postby Candy » 14:12, 25 March 2014

It is not programmed by Roland, it was programmed private. I hope, that the programmer reads this threads here, or ... otherwise I will write him an Email...

Candy
User avatar
Candy
 
Posts: 197
Joined: 06:30, 15 November 2008

Re: FA Editor

Postby Candy » 12:35, 29 March 2014

Bad news: I asked the programmer of the Integra-7, weather he plans to program also an editor for the FA-Synths. He wrote, that he hasn't a FA-Synthesizer, so he can't write a program for it. That's too bad!
User avatar
Candy
 
Posts: 197
Joined: 06:30, 15 November 2008

Re: FA Editor

Postby Quinnx. » 16:53, 29 March 2014

I dont know if anyone has tryed the integra editor on the FA..
but they say integra patches are directly compatible with the FA so that would mean
all sysex would be the same too.. which should mean the integra editor should work in some fashion
unless im mistaken..
User avatar
Quinnx.
 
Posts: 3437
Joined: 11:28, 13 January 2005
Location: HomeTown Ireland: Current Location USA

Re: FA Editor

Postby Candy » 20:27, 29 March 2014

How I wrote above, I tried the Integra-7-Editor, but it didn´t run.

Here is the original answer from the Int.-7-Programer:

Sorry.
I don't plan to program FA Editor.
Integra-7 and FA-06/08 are similar.
Part Parameters, Super Natural Synthesizer, PCM(=XV-5080) and MFX are same.
But Super Natural Acoustic, PCM Drum Waves, EX PCM Area, Total Effects and Sampling function (near equal SP-404) are different.
I do not have FA-06/08.
I can't test these functions different from Integra-7.
so I can't correct, even if Program hangs-up or freezes.

k_take@dual.squares.net
http://synth-voice.sakura.ne.jp/
K_Take
User avatar
Candy
 
Posts: 197
Joined: 06:30, 15 November 2008

Re: FA Editor

Postby Quinnx. » 15:14, 30 March 2014

How I wrote above, I tried the Integra-7-Editor, but it didn´t run.

I downloaded and ran the XP version on windows 7 and it ran.
If you do this and choose the FA as the midi in/out
what happens then when you do edits?
User avatar
Quinnx.
 
Posts: 3437
Joined: 11:28, 13 January 2005
Location: HomeTown Ireland: Current Location USA

Re: FA Editor

Postby JunoJohn » 22:40, 30 March 2014

The Integra-7 and FA's have different Model ID's for SysEx, so the Integra-7 Editor can't be used directly with the FA's.

Integra-7 Model ID: 00 00 64 (hex)
FA-06/08 Model ID: 00 00 77 (hex)

Please look at K_Take's response quoted by Candy, two posts above.
JunoJohn
 
Posts: 792
Joined: 08:29, 24 February 2008
Location: Washington DC

Re: FA Editor

Postby jblongz » 18:15, 31 March 2014

If someone can translate to english for the programmer: Start an Indiegogo campaign to create a Mac/iOS editor, I will personally contribute to the fund and get the word out to all FA-0 users.
jblongz
 
Posts: 31
Joined: 19:45, 2 April 2013
Location: New York/Taipei

Re: FA Editor

Postby Español » 17:37, 4 September 2014

Here is an editor for the Roland FA 06: 'Supernatural Synth Editor "but I could not try it because I have not found a way to download it:

http://mididesigner.com/qa/3093/roland- ... editor-wip

Do any of you have been able to download it and try it?
Español
 
Posts: 119
Joined: 17:27, 4 September 2014
Location: Alicante, España

Next

Return to Roland FA-06 / FA-07 / FA-08

Who is online

Users browsing this forum: Bing [Bot], CobraJet, Google Adsense [Bot], tommy1212 and 4 guests