Page 2 of 2

Re: Roland Support Vids (update)

Posted: 16:27, 19 November 2014
by 80+
A private video may have some qui dos. BUT, NO help those of us looking for useful information..............dg.

Re: Roland Support Vids (update)

Posted: 20:22, 24 November 2014
by discofuneral2
Hey Im not sure who to talk to. I broke a key in the fantom x8 and opened it up with my buddy we fixed the key and the lighting in the screen and then put it back together.. I turned it on yesterday and about 5-6 keys stopped working (in different octives) low g#, middle C, and higher E,C and g#.. Was wondering what I should do.. if its an easy fix or If I should take it in.. I have a show coming up soon and would like to get this done asap ?? Let me know someone.. PLEASE :)

Re: Roland Support Vids (update)

Posted: 14:05, 30 November 2014
by PauloF
discofuneral2 wrote:Hey Im not sure who to talk to. I broke a key in the fantom x8 and opened it up with my buddy we fixed the key and the lighting in the screen and then put it back together.. I turned it on yesterday and about 5-6 keys stopped working (in different octives) low g#, middle C, and higher E,C and g#.. Was wondering what I should do.. if its an easy fix or If I should take it in.. I have a show coming up soon and would like to get this done asap ?? Let me know someone.. PLEASE :)
This is not the right forum for that Fantom problem. You should refer to the Fantom X forum instead.

If I was in your shoes, and before getting it to repair, I would open it again and check if there is any disconnected cable or ribbon connecting the mother board and the keybed...

Re: Roland Support Vids (update)

Posted: 21:17, 2 September 2015
by bennyseven
Ed Diaz: "How to sync Roland FA-06/08 to Roland MX-1"


http://youtu.be/D8czx5O_g4Q

Re: Roland Support Vids (update)

Posted: 21:40, 2 September 2015
by cello
Ed Diaz: "How to sync Roland JD-XA to Roland MX-1"

https://www.youtube.com/watch?v=tz4bnUuy3TU

Re: Roland Support Vids (update)

Posted: 06:05, 16 September 2015
by bennyseven
backup and custom TWA subject to Ed Diaz' videos

https://m.youtube.com/watch?feature=you ... PtWdDDNN64

Re: Roland Support Vids (update)

Posted: 00:24, 4 October 2015
by bennyseven
how to share studio sets

http://youtu.be/mo7ih7JkRvA

Re: Roland Support Vids (update)

Posted: 19:41, 8 October 2015
by Rotmistr
How to create a song with Arpeggios
https://youtu.be/ycKd0AL-R-s

Re: Roland Support Vids (update)

Posted: 20:42, 30 June 2016
by bennyseven
Pretty good video about using VOCODER MFX effect possble nearly on every tone in the FA.

https://www.youtube.com/watch?v=mxLAiYPLqoI

From jawnyb2.


And this one:

https://www.youtube.com/watch?v=Yw1vxnstifo

From Humberto A Perez.

Re: Roland Support Vids (update)

Posted: 16:46, 1 September 2016
by HonesVonHonestein
Does anyone know of a good video on the microscope feature. I've read the manual and understand it in principle but would be really helped with a visual example of adding midi commands as the entire midi thing is a new experience here. Thanks!

Re: Roland Support Vids (update)

Posted: 17:01, 26 September 2016
by Rotmistr

Re: Roland Support Vids (update)

Posted: 20:34, 9 June 2017
by Joe P
Here is one I just saw, apologies if it has already been posted, how to import Integra 7 sounds from Axial onto FA-06/08:

https://www.youtube.com/watch?v=VwF36wsH688&t=373s

Re: Roland Support Vids (update)

Posted: 11:33, 19 December 2017
by RoDi
Recently Roland has published some new videos for the FA-06/07/08. Especially those about the creation of custom rythm patterns and arpeggios might be helpful. As usual very clearly presented by Ed Diaz.

See:
https://www.youtube.com/watch?v=o7wC1AAcOgk
https://www.youtube.com/watch?v=saPNNoQL-G0

Regards,
RoDi

Re: Roland Support Vids (update)

Posted: 20:54, 11 January 2019
by bennyseven
Ed Diaz is live NOW on Roland FA Facebook page