Harmonizer on FA-08
-
- Posts: 13
- Joined: 08:48, 6 May 2016
Harmonizer on FA-08
Hey guys, is there a harmonizer function on the FA-08?
-
- Posts: 681
- Joined: 11:08, 21 June 2010
Re: Harmonizer on FA-08
There's a Chord Memory function which will pitch it's own midi notes (i.e. internal sounds) across preset chords, 5th's, and octaves etc.
See Here:-
https://www.youtube.com/watch?v=uDhoXuntehc
But i don't think there's anything that does it on an audio basis if you were thinking of using it on mic input etc.
See Here:-
https://www.youtube.com/watch?v=uDhoXuntehc
But i don't think there's anything that does it on an audio basis if you were thinking of using it on mic input etc.
-
- Posts: 13
- Joined: 08:48, 6 May 2016
Re: Harmonizer on FA-08
I see, but is there anyway to change the chord memory function settings? Because I would like to be 3rd apart, but there isn't any preset for it.Skijumptoes wrote:There's a Chord Memory function which will pitch it's own midi notes (i.e. internal sounds) across preset chords, 5th's, and octaves etc.
See Here:-
https://www.youtube.com/watch?v=uDhoXuntehc
But i don't think there's anything that does it on an audio basis if you were thinking of using it on mic input etc.
-
- Posts: 681
- Joined: 11:08, 21 June 2010
Re: Harmonizer on FA-08
Well, technically you can do whatever you want with a studio set, i.e. create a second channel, same instrument preset, but transpose it to the 3rd and set it to 'Key = on' so that it plays along with your first channel when you press the keys. So yes there is a way.
But, it's not as immediate than the chord memory function, i'm not near my FA at the moment so can't remember if there is a user setting there or not to create your own intervals, from memory you can't however.
But, it's not as immediate than the chord memory function, i'm not near my FA at the moment so can't remember if there is a user setting there or not to create your own intervals, from memory you can't however.
Re: Harmonizer on FA-08
Another way around; when you create a tone, use the pitch on a second partial and pitch it a 3rd up (or wherever you want). There are a few presets made this way, not a genuine harmonizer, but it gets the job done well enough.
-
- Posts: 699
- Joined: 18:01, 19 April 2014
- Location: Germany
Re: Harmonizer on FA-08
There are also three variants of a pitch shifter in the IFX section. Page 87 in the Parameter List Manual. Could be used at least for one part.
Waveform pitch shift is on page 62.
There is a TFX pitch shifter too, but might be not helpful, on page 21.
Waveform pitch shift is on page 62.
There is a TFX pitch shifter too, but might be not helpful, on page 21.
-
- Posts: 13
- Joined: 08:48, 6 May 2016
Re: Harmonizer on FA-08
How to access to the IFX Parameters?bennyseven wrote:There are also three variants of a pitch shifter in the IFX section. Page 87 in the Parameter List Manual. Could be used at least for one part.
Waveform pitch shift is on page 62.
There is a TFX pitch shifter too, but might be not helpful, on page 21.
-
- Posts: 699
- Joined: 18:01, 19 April 2014
- Location: Germany
Re: Harmonizer on FA-08
Insert effect is on the effect edit page.
In the studio set, select the part where the IFX should apply to.
Go to effect page. On the lower right side of the screen switch from M.COMP to IFX.
Now select the IFX effect and set parameters as you like.
There is a stereo one voice shifter, a two voice shifter and a 16 step pitch shifter.
In the studio set, select the part where the IFX should apply to.
Go to effect page. On the lower right side of the screen switch from M.COMP to IFX.
Now select the IFX effect and set parameters as you like.
There is a stereo one voice shifter, a two voice shifter and a 16 step pitch shifter.
-
- Posts: 13
- Joined: 08:48, 6 May 2016
Re: Harmonizer on FA-08
Got it. But until this section, I'm not sure where is the parameters edit section?
- Attachments
-
- 18120511_1412916935398024_1030280116_o.jpg (243.03 KiB) Viewed 953 times
-
- Posts: 681
- Joined: 11:08, 21 June 2010
Re: Harmonizer on FA-08
Isn't the IFX using the TFX effects?
If so to get to the parameters, just press the hot key under 'TFX', or you can turn the TFX 'Amount' knob while holding shift.
Also, Holding Shift on that effects page also gives you more hot keys at the bottom if it's not using the TFX engine, and you can probably pick IFX/MComp or something, there's definitely some hidden keys on that screen from memory.
If so to get to the parameters, just press the hot key under 'TFX', or you can turn the TFX 'Amount' knob while holding shift.
Also, Holding Shift on that effects page also gives you more hot keys at the bottom if it's not using the TFX engine, and you can probably pick IFX/MComp or something, there's definitely some hidden keys on that screen from memory.
-
- Posts: 699
- Joined: 18:01, 19 April 2014
- Location: Germany
Re: Harmonizer on FA-08
IFX is not TFX.
IFX is INSERT effect, TFX is TOTAL effect to the output.
IFX is INSERT effect, TFX is TOTAL effect to the output.
-
- Posts: 699
- Joined: 18:01, 19 April 2014
- Location: Germany
Re: Harmonizer on FA-08
In the effects edit page press shift and choose IFX to access the IFX edit page.
-
- Posts: 13
- Joined: 08:48, 6 May 2016
Re: Harmonizer on FA-08
Thank you everyone for your help. I managed to find the IFX settings and tried it. However, The second voice that I wanted is in Bb major key. As such, the IFX settings could not follow the key but always on the fix semitone apart.
-
- Posts: 699
- Joined: 18:01, 19 April 2014
- Location: Germany
Re: Harmonizer on FA-08
Think about to use an arranger keyboard. My experience is, a workstation won't help much.