Sample from USB? - Solved

Forum for Roland FA-06/08
Post Reply
Maarkr
Posts: 38
Joined: 02:49, 8 May 2011
Location: Maine

Sample from USB? - Solved

Post by Maarkr »

p79 of the manual shows how to record samples into the pads by USB, but I cannot get any input from the USB side... keyboard input shows up fine, USB driver setup as midi+audio in general system setup. What am i missing? Haven't tried line-in yet, just thought it would show the USB input.
bennyseven
Posts: 699
Joined: 18:01, 19 April 2014
Location: Germany

Re: Sample from USB?

Post by bennyseven »

do you have installed the FA driver on your host system?
Maarkr
Posts: 38
Joined: 02:49, 8 May 2011
Location: Maine

Re: Sample from USB?

Post by Maarkr »

the site says that the W10 driver should auto load when the USB is plugged in. I dl'd the file and there is only some html files in it.
BUT, at the bottom of the page it stated that if a USB 3 port doesn't work, use a USB 2 port. I changed the port and it worked. See my post above about changing the default playback device, because it switched my default from the audio controller to the FA.
Post Reply