Sample from USB? - Solved
Sample from USB? - Solved
p79 of the manual shows how to record samples into the pads by USB, but I cannot get any input from the USB side... keyboard input shows up fine, USB driver setup as midi+audio in general system setup. What am i missing? Haven't tried line-in yet, just thought it would show the USB input.
-
- Posts: 699
- Joined: 18:01, 19 April 2014
- Location: Germany
Re: Sample from USB?
do you have installed the FA driver on your host system?
Re: Sample from USB?
the site says that the W10 driver should auto load when the USB is plugged in. I dl'd the file and there is only some html files in it.
BUT, at the bottom of the page it stated that if a USB 3 port doesn't work, use a USB 2 port. I changed the port and it worked. See my post above about changing the default playback device, because it switched my default from the audio controller to the FA.
BUT, at the bottom of the page it stated that if a USB 3 port doesn't work, use a USB 2 port. I changed the port and it worked. See my post above about changing the default playback device, because it switched my default from the audio controller to the FA.