Tip: partially using of TFX

Forum for Roland FA-06/08
Post Reply
lipi
Posts: 55
Joined: 08:22, 19 October 2017
Location: Hungary
Contact:

Tip: partially using of TFX

Post by lipi »

Hi there!

I just found this small trick to using the TFX for several parts instead of "total". :)

You need an audio cable like this: Image
and a converter: Image
Then wiring the SUB OUT in to the AUDIO IN.

In your Studio Set Effect settings set the TFX location to Input. Set the Audio Input level about 20.

Now the tracks and only these what are you set to SUB output are run across the TFX, the others are not.

In some cases it maybe usable when you want to use a "Carbon Based Lifeforms" like filtered drum track, or any different master FX upwards the Chorus and Reverb.

Here is an own example how it's work:
https://www.youtube.com/watch?v=qktRAYSdMIA
The track10 are across the TFX (Filter+Drive) and continously changing during the song. It's saved as sysex on the track01.

Disadvantages in this case:
- you can't use the AUDIO IN for other external source;
- you can' t use the SUB for external FX/AMP;
- the tracks what are send to SUB->TFX route are will not exported as WAV...
stevel
Posts: 520
Joined: 07:08, 17 May 2015

Re: Tip: partially using of TFX

Post by stevel »

This is brilliant!

Thanks for posting.
Post Reply