FA-06/07/08 Editor for Windows
FA-06/07/08 Editor for Windows
Hello FA community:
I´m just launching the new FA Workstation Editor for Windows.
Installation link: https://dl.orangedox.com/FAEditorInstall
I hope you enjoy it! Donate me a beer if you like it (link in the app), and keep me motivated to continue this development.
If you have troubles, suggestions, comments, just put here in this post.
Cheers!
I´m just launching the new FA Workstation Editor for Windows.
Installation link: https://dl.orangedox.com/FAEditorInstall
I hope you enjoy it! Donate me a beer if you like it (link in the app), and keep me motivated to continue this development.
If you have troubles, suggestions, comments, just put here in this post.
Cheers!
Re: FA-06/07/08 Editor for Windows
Congratulations it's very good!
Thanks for your efforts, donated a few beers, well deserved!!! :)
I might have some suggestions for improvements down the road...
It's not said but the Roland FA USB Driver need to be in: VENDOR (MIDI+AUDIO) in General System Settings.
I had it in GENERIC (Midi Only) and it reads everything and sends parts but when sending Studio Set it would freeze the program. It was necessary to unplug the USB or restart FA to work again.
Thanks for your efforts, donated a few beers, well deserved!!! :)
I might have some suggestions for improvements down the road...
It's not said but the Roland FA USB Driver need to be in: VENDOR (MIDI+AUDIO) in General System Settings.
I had it in GENERIC (Midi Only) and it reads everything and sends parts but when sending Studio Set it would freeze the program. It was necessary to unplug the USB or restart FA to work again.
Re: FA-06/07/08 Editor for Windows
Wow, thank you very much for your efforts. Great job!
Re: FA-06/07/08 Editor for Windows
Thanks for the beers !!!MINDKeys wrote:Congratulations it's very good!
Thanks for your efforts, donated a few beers, well deserved!!! :)
I might have some suggestions for improvements down the road...
It's not said but the Roland FA USB Driver need to be in: VENDOR (MIDI+AUDIO) in General System Settings.
I had it in GENERIC (Midi Only) and it reads everything and sends parts but when sending Studio Set it would freeze the program. It was necessary to unplug the USB or restart FA to work again.
I´ve released a new version - 1.0.8.0 - with corrections for GENERIC driver.
Marcelo.
Re: FA-06/07/08 Editor for Windows
Working great!!! Thank's
Re: FA-06/07/08 Editor for Windows
New version available at: https://dl.orangedox.com/FAEditorInstall
Thanks!
Thanks!
- Attachments
-
- Enhanced Part Edition
- Slide10.PNG (1.07 MiB) Viewed 17090 times
-
- Importing Parts from FA or SysEx files
- Slide9.PNG (2.04 MiB) Viewed 17090 times
-
- Virtual Keybed activity and monitoring
- Slide5.PNG (894.87 KiB) Viewed 17090 times
-
- Connecting to FA
- Slide2.PNG (1.66 MiB) Viewed 17090 times
Re: FA-06/07/08 Editor for Windows
Thanks for the update. And thank you especially for the manual. The video you made is very attractive but things are so fast (that is for me it is!) that I could not exactly see what and how. I will check the manual to see if even an old guy can understand your great program!
Re: FA-06/07/08 Editor for Windows
Hi, first of all, thanks, this is an amazing software that saves a lot of time when you need to prepare your gig.
I am a Mac user, so tried to run with crossover (to run Win apps in Mac) but was unlucky, but I will give a try in my old W7 laptop.
Thank you very much!
I am a Mac user, so tried to run with crossover (to run Win apps in Mac) but was unlucky, but I will give a try in my old W7 laptop.
Thank you very much!
Re: FA-06/07/08 Editor for Windows
Could you share some details, error logs, that I can use to investigate and try to make app compatible?neomad wrote: I am a Mac user, so tried to run with crossover (to run Win apps in Mac) but was unlucky
Thank you very much!
Could you please, check if you can install the following dependency .NET frameworks:
https://www.microsoft.com/en-us/downloa ... aspx?id=22
https://www.microsoft.com/en-us/downloa ... x?id=42642
Thanks!
Re: FA-06/07/08 Editor for Windows
Hello All:
New Release, with new features:
https://dl.orangedox.com/FAEditorInstall
[November, 15th, 2020] - Version 1.2.0.0
- Wish List implemented:
- Edition of any parameter in Parameter Database window
- Read Studio Set Range for Librarian
- Read User Tones Range for Librarian
- Bugfixed:
- handling of names for USER Tones, sometimes names are not updated properly
- Saving/Sending sysex files with empty USER Tones is crashing
- Tone names with wrong characters
- copy MIDI logs to clipboard not working
- Progress Bar messages crashing
- Done:
- New User Studio Set / User Tones LIBRARIAN
- Load Studio Sets from folder
- Read User Studio Sets range from FA
- Read User Tones from range FA
- Show Tones usage per Studio Set
- Generate Reports
- Save User Studio Sets and User Tones in files
- Load User Studio Sets and User Tones into Editor
- New Parameter Edition widget
- New Parameter hooking and preparation for future Controller Mode feature
- Improvements on Database for faster loading and reading data
- Improvements on MIDI communication for faster reading and sending data
- Improvements on User Interface on parameter updates
- Improvements on Switch Group synchronization with FA
- improvements on Tone Database loading time
- Included missing/undocumented “Receive Source 1-4” parameters
Cheers!
New Release, with new features:
https://dl.orangedox.com/FAEditorInstall
[November, 15th, 2020] - Version 1.2.0.0
- Wish List implemented:
- Edition of any parameter in Parameter Database window
- Read Studio Set Range for Librarian
- Read User Tones Range for Librarian
- Bugfixed:
- handling of names for USER Tones, sometimes names are not updated properly
- Saving/Sending sysex files with empty USER Tones is crashing
- Tone names with wrong characters
- copy MIDI logs to clipboard not working
- Progress Bar messages crashing
- Done:
- New User Studio Set / User Tones LIBRARIAN
- Load Studio Sets from folder
- Read User Studio Sets range from FA
- Read User Tones from range FA
- Show Tones usage per Studio Set
- Generate Reports
- Save User Studio Sets and User Tones in files
- Load User Studio Sets and User Tones into Editor
- New Parameter Edition widget
- New Parameter hooking and preparation for future Controller Mode feature
- Improvements on Database for faster loading and reading data
- Improvements on MIDI communication for faster reading and sending data
- Improvements on User Interface on parameter updates
- Improvements on Switch Group synchronization with FA
- improvements on Tone Database loading time
- Included missing/undocumented “Receive Source 1-4” parameters
Cheers!
- Attachments
-
- User Library - User Tones
- Slide21.PNG (675.38 KiB) Viewed 16619 times
-
- User Library - Reports
- Slide20.PNG (2.4 MiB) Viewed 16619 times
-
- User Library - User Studio Sets
- Slide19.PNG (1.45 MiB) Viewed 16619 times
-
- Parameter Editor
- Slide14.PNG (1.5 MiB) Viewed 16619 times
Re: FA-06/07/08 Editor for Windows
Thank you very much for updating and all the extra's you created!!!
-
- Posts: 4
- Joined: 18:14, 14 November 2020
Re: FA-06/07/08 Editor for Windows
Thank you so much for all your work! Being able to call up studio sets to and from the FA and save them to computer in dedicated software is such a nice thing. Wish I had more time to play with it a little more at present. Looking forward to tone editing and whatever else you might be able to cook up. Godspeed!
Re: FA-06/07/08 Editor for Windows
Hello. I have tried also version 1.2, not working. The error I am getting is : Error 255. I am running Crossover 19. You may find more info about this error in this link https://www.codeweavers.com/support/for ... msg=224082tchelomgf wrote:Could you share some details, error logs, that I can use to investigate and try to make app compatible?neomad wrote: I am a Mac user, so tried to run with crossover (to run Win apps in Mac) but was unlucky
Thank you very much!
Could you please, check if you can install the following dependency .NET frameworks:
https://www.microsoft.com/en-us/downloa ... aspx?id=22
https://www.microsoft.com/en-us/downloa ... x?id=42642
Thanks!
Hope it helps to help us :) thanks !
Re: FA-06/07/08 Editor for Windows
Could you provide the full error log like the one in the forum for my executable ?neomad wrote: Hello. I have tried also version 1.2, not working. The error I am getting is : Error 255. I am running Crossover 19. You may find more info about this error in this link https://www.codeweavers.com/support/for ... msg=224082
Hope it helps to help us :) thanks !
Thanks!
Re: FA-06/07/08 Editor for Windows
Since this editor is developed under Visual Studio .NET 2015, could you check if you are able to install the runtime in your Crossover environment ?neomad wrote: Hello. I have tried also version 1.2, not working. The error I am getting is : Error 255. I am running Crossover 19.
https://www.codeweavers.com/compatibili ... le-runtime
Thanks.