Boot screen update mode problem
- axenomorph
- Posts: 8
- Joined: 20:14, 15 December 2021
- Location: Moscow
Boot screen update mode problem
Please check if the update mode starts without the USB drive on FA-06 2.03? Write + power = black screen “=update mode= please insert usb memory”
- axenomorph
- Posts: 8
- Joined: 20:14, 15 December 2021
- Location: Moscow
Re: Boot screen update mode problem
Please check on your FA-06 07 08 and write to me if it turned on without a USB drive in the update mode (write+power on)! I need it for warranty service or replacement!
-
- Posts: 267
- Joined: 15:58, 27 October 2018
Re: Boot screen update mode problem
I see that around 150 members have read your 2 posts and no replies.
I suspect they are not comfortable with what you are asking them to do, perhaps it sounds a bit 'dangerous"?
Hope you get sorted somehow.
I suspect they are not comfortable with what you are asking them to do, perhaps it sounds a bit 'dangerous"?
Hope you get sorted somehow.
- axenomorph
- Posts: 8
- Joined: 20:14, 15 December 2021
- Location: Moscow
Re: Boot screen update mode problem
Dangerous? Without a USB drive? I don't think so! My Fa-06 when pressing write + power on does not load further than the logo. But I saw how without a usb drive I was loaded into update mode. And asked to insert a USB drive. Now he is in the service center under warranty. I need to know that only mine does not load into update mode.
https://share.icloud.com/photos/0e1sKbt ... eaRc5LOHxQ
https://share.icloud.com/photos/0e1sKbt ... eaRc5LOHxQ
- axenomorph
- Posts: 8
- Joined: 20:14, 15 December 2021
- Location: Moscow
Re: Boot screen update mode problem
I was replaced by the main board warranty and now everything works!