Hardware settup. No midi since update to 1.1

Forum for Aira
Post Reply
Bshelton
Posts: 1
Joined: 16:09, 25 January 2015

Hardware settup. No midi since update to 1.1

Post by Bshelton »

My set up includes Electribe ESX, Roland TR8, Roland TB3, and various other synths. Before I updated, I was able to control everything with the ESX... using a midi-thru box (Midi out from ESX to in on thru box, which then branches out to 4 different machines. Since the update, the TR8 does not sync at all. Press start on ESX... everything else starts as before, but the TR8 is unaffected. ESX is set to internal clock. If I run a midi cord straight from the ESX out to the TR8 in, it works perfectly. So the thru box is definitely the issue. I've tested all cords and midi ports, and as I said above, it worked before the update. Any suggestions?
Post Reply