Help using a tr-8 in Ableton as an audio interface

Forum for Aira

Help using a tr-8 in Ableton as an audio interface

Postby yaaaldi » 10:32, 17 November 2016

I'm using my tr-8 as an audio interface in ableton. The problem I'm facing is that the sound coming out of the external output on the tr8 has the sound that comes directly from the tr-8 as well as the ableton output sound. This means that if I listen to the monitor in ableton I hear both the ableton output as well as the audio directly out the tr-8. It creates a sort of doubling effect with the latency that's there.

I don't want to hear the mix audio directly out the tr-8, I only want to hear the audio out from the tr-8 that is routed through ableton.

Can anyone tell me if it's possible to achieve this? Basically I want to mute the sound that comes directly from the tr8 and just hear abletons output. Cheers.
yaaaldi
 
Posts: 1
Joined: 10:30, 17 November 2016


Re: Help using a tr-8 in Ableton as an audio interface

Postby 2:43AM » 14:27, 18 January 2017

Sorry for this late and unhelpful reply, but my advice is to buy a real audio interface. Roland seriously screwed up when they designed the TR-8's audio-over-USB function. It's the worst decision I've seen in a modern-day synthesizer/audio device in a long time.
2:43AM
 
Posts: 108
Joined: 18:16, 14 February 2012
Location: Midwest USA

Re: Help using a tr-8 in Ableton as an audio interface

Postby Peter Heard » 10:56, 12 June 2017

I have had success with this. I think i used the ableton feature of hardware delay to get the sounds married up enough to be functional
Peter Heard
 
Posts: 9
Joined: 01:25, 2 August 2016


Return to Aira

Who is online

Users browsing this forum: No registered users and 2 guests