MX-1: Audio & MIDI recording

Forum for Aira

MX-1: Audio & MIDI recording

Postby AlienableTone » 14:46, 6 December 2016

Apologies in advance for the noob question...

I'm pretty sure the answer is yes but wanted to double check - I know we can send audio from MX-1's individual channels to Ableton, but can we also capture the individual channels' midi as well? We can, right? I know I'll have to set all my channels correctly, etc... BUT, it should be possible?

Ideally I'd like to be able to record my live performances into Ableton, both audio and midi for each channel - to then be able to do a few edits if needed before sending back the audio to the MX-1 and finally record a project with the MX-1's effects via the master out.

Anyone doing something similar?
Posts: 4
Joined: 15:57, 15 November 2016

Re: MX-1: Audio & MIDI recording

Postby projektil » 09:29, 19 February 2017

I have a system-1 connected via USB to an MX-1 which is then connected to the PC.

Setting the system-1 to Local Off, then playing VST instruments on the host in Ableton works quite well. But I haven´t recorded anything yet, as I´m still setting up the things I bought last week. As the MIDI data flows from System-1 hardware thru MX-1 to the host (and even back to the System-1 if you choose so), I don´t see a reason why this can´t be recorded. Will test in the next days.
Posts: 11
Joined: 11:54, 7 February 2017

Re: MX-1: Audio & MIDI recording

Postby Novaliz » 01:46, 25 February 2017

When using the MX-1 do I need an another audiointerface too? If not is its audiointerface comparable with a Focusrite in terms of latency?
Posts: 7
Joined: 02:06, 24 February 2017

Re: MX-1: Audio & MIDI recording

Postby Goon » 13:21, 25 February 2017

The MX-1 is also an interface too, in my own experience, better than my old Scarlette 2i2.
Posts: 65
Joined: 23:43, 11 July 2015

Return to Aira

Who is online

Users browsing this forum: No registered users and 1 guest