MX-1 USB passthrough?

Forum for Aira
Post Reply
ABGgd
Posts: 27
Joined: 00:39, 1 February 2014

MX-1 USB passthrough?

Post by ABGgd »

How are the devices plugged into the MX-1's USB host ports seen by the computer? If I plug in my System-8 and FA-08, would my computer see them as System-8 and FA-08 or would they be seen as some kind of MX-1 device?

I haven't been able to find an answer for this.
sbontrager
Posts: 10
Joined: 16:52, 8 November 2016

Re: MX-1 USB passthrough?

Post by sbontrager »

They show up as MX-1 USB-1/2/3/4
ABGgd
Posts: 27
Joined: 00:39, 1 February 2014

Re: MX-1 USB passthrough?

Post by ABGgd »

So does that mean that downloading plugouts wouldn't work through the MX-1 i.e. the computer wouldn't see the System-8 as a System-8?
sbontrager
Posts: 10
Joined: 16:52, 8 November 2016

Re: MX-1 USB passthrough?

Post by sbontrager »

Actually, the Roland driver (at least on MacOS) is smart enough for this to work. I've done plugout installs through the MX-1 just fine. Also, the Modular Customizer works through it as well (even though it doesn't get the port names in the selection screen).

http://www.indievisible.org/Projects/mx1demora.png
Image

http://www.indievisible.org/Projects/mx1studio1.pngImage
ABGgd
Posts: 27
Joined: 00:39, 1 February 2014

Re: MX-1 USB passthrough?

Post by ABGgd »

That helps a lot. I wasn't sure whether the MX-1 acted like a USB hub or whether it virtualized the devices behind it. It seems like it's the latter, more or less. I was worried that I'd have to plug the S8 directly into into my Mac to get it work properly with plugouts. I'm glad that's not the case. Thanks for answering my questions.
User avatar
rcmusic35
Posts: 92
Joined: 17:33, 23 January 2017
Contact:

Re: MX-1 USB passthrough?

Post by rcmusic35 »

It could be nice to allow us to rename mx1 usb channels...
Post Reply