Fresh JD-XA video

Forum for the JD-XA.
User avatar
Synth Guru
Posts: 134
Joined: 19:43, 11 July 2015
Contact:

Fresh JD-XA video

Post by Synth Guru »

Here's a brand new video from Sweetwater featuring Scott Tibbs on the amazing Roland JD-XA.

http://youtu.be/lryMa9q74Lo
CShorte
Posts: 147
Joined: 14:02, 10 June 2008
Location: Washington DC Area, USA

Re: Fresh JD-XA video

Post by CShorte »

A very good and informative video. Thanks, CS.
pedro89
Posts: 37
Joined: 15:53, 20 June 2015

Re: Fresh JD-XA video

Post by pedro89 »

@Synth Guru: Stop naming and shaming me! Your Stasi tactics will get you nowhere. Compared to here nobody has ever had a problem with me over at Sonic State. Ditto for Gearslutz, Synthtopia, BBoy Tech Report, Attack Magazine and MPC Forums. Even the great Nick Batt himself answeres my questions regulary. Only three days ago he wrote this:

Nick VB Said...
Hey Pedro, I seriously doubt Scott Tibbs lied, more likely he just did not know and busked it, or it didnt have swing back then, bear in mind that I have a preproduction model so his must have been, prepre. Regarding Drum sounds - unlikely - it would require a whole bunch of extra memory to store the PCM samples. I would also seriously doubt JD-Xi compatibility, the voice architecture is different in each (and I dont have the JD-Xi anymore)
14-Jul-15 04:34 AM
http://www.sonicstate.com/news/2015/07/ ... ew-part-1/

The fact of the matter is that I gave an extraordinary input so far, expecially considering that I´ve only been posting here a short period of time. Stop your smear campaign. Your attempt to scare or disgust the public against me won´t be successful and is simply laughable, to put it mildly.
apauw
Posts: 98
Joined: 08:27, 26 May 2015

Re: Fresh JD-XA video

Post by apauw »

Nick just gave you a professional reply, which does not say anything about you.

You just seem to be very full of yourself. In the normal world, modesty pays off better.
User avatar
Synth Guru
Posts: 134
Joined: 19:43, 11 July 2015
Contact:

Re: Fresh JD-XA video

Post by Synth Guru »

Pedro89 got temporarily banned by the moderator for not following the terms of the warning he was recently issued.
User avatar
richardbates1
Posts: 389
Joined: 19:58, 19 July 2013

Re: Fresh JD-XA video

Post by richardbates1 »

Synth Guru wrote:Pedro89 got temporarily banned by the moderator for not following the terms of the warning he was recently issued.
That's good news.
MC909Rulez4Ever
Posts: 11
Joined: 18:09, 17 July 2015

Re: Fresh JD-XA video

Post by MC909Rulez4Ever »

my friend pedro has asked me to inform you of the fact that he has been denied access to the site.
he did not refuse to admit he perhaps has some kind of social perception/mood disorder.
does having a disorder mean you need treatment?
in case of pedro i would say ’definitely’.
adios from granada, spain.
User avatar
richardbates1
Posts: 389
Joined: 19:58, 19 July 2013

Re: Fresh JD-XA video

Post by richardbates1 »

Here is a video that really goes in depth with the analog filters.
Very informative.
https://www.youtube.com/watch?v=AbSQ5H_ ... BDFc62YZgq
User avatar
richardbates1
Posts: 389
Joined: 19:58, 19 July 2013

Re: Fresh JD-XA video

Post by richardbates1 »

MC909Rulez4Ever wrote:my friend pedro has asked me to inform you of the fact that he has been denied access to the site.
he did not refuse to admit he perhaps has some kind of social perception/mood disorder.
does having a disorder mean you need treatment?
in case of pedro i would say ’definitely’.
adios from granada, spain.
I don't mean this in a judgmental way at all....there is nothing wrong with seeking treatment.
We all could use it at some time in our lives.
User avatar
Synth Guru
Posts: 134
Joined: 19:43, 11 July 2015
Contact:

Re: Fresh JD-XA video

Post by Synth Guru »

RayS
Posts: 246
Joined: 04:09, 27 August 2011

Re: Fresh JD-XA video

Post by RayS »

Thanks Synth Guru, We need some "how to" Sequencer videos.. and menu diving explanation videos. Also part copying between patches.
User avatar
Synth Guru
Posts: 134
Joined: 19:43, 11 July 2015
Contact:

Re: Fresh JD-XA video

Post by Synth Guru »

Here's a couple more from the same author that we have seen before.

Very nice.

https://youtu.be/l7smmMlluis
https://youtu.be/ddZyHq2Gq5k
RonF
Posts: 180
Joined: 17:48, 10 February 2010
Location: San Diego, CA USA

Re: Fresh JD-XA video

Post by RonF »

Here's my latest creation. Thought it might be of interest here:

https://youtu.be/EGA143h9Pbk
User avatar
Synth Guru
Posts: 134
Joined: 19:43, 11 July 2015
Contact:

Re: Fresh JD-XA video

Post by Synth Guru »

Hi Ron,

Very nice creative tracks! It took me a while to figure out your Elektron set up. I was what in the world is that machine. I then realized it's two components mounted on a semi-circular rack. Very kool! ;-)

Thank you for sharing mate!

Cheers!
RonF
Posts: 180
Joined: 17:48, 10 February 2010
Location: San Diego, CA USA

Re: Fresh JD-XA video

Post by RonF »

oh yes, the ability to use third party and custom "end cheeks" to mount Electron boxes is a very cool feature. Some of them are spectacular, and really raise the ergonomics of working with them (since they are so hands on). I found this one years ago. Love it! Sturdy and adjustable.

Thanks for your kind comments!

Ron
Post Reply