New Front Panel Overlay coming for JD-XA
Re: New Front Panel Overlay coming for JD-XA
hi everybody.
It's up to me to share my experience.
I've put my panels yesterday and all was ok.
My JD-XA is beautiful now and i can say i'm really happy for buying it.
Thanks jamie,and no worry to buy this product from synthgraphics.
It's up to me to share my experience.
I've put my panels yesterday and all was ok.
My JD-XA is beautiful now and i can say i'm really happy for buying it.
Thanks jamie,and no worry to buy this product from synthgraphics.
- Attachments
-
- image.jpeg (2.06 MiB) Viewed 2234 times
-
- image.jpeg (2.06 MiB) Viewed 2234 times
-
- Posts: 104
- Joined: 23:06, 3 November 2015
Re: New Front Panel Overlay coming for JD-XA
Glad to see everyone is having good results with installation. Thanks guys for the pics and support! Cheers, Jamie
Re: New Front Panel Overlay coming for JD-XA
richardbates1 wrote:Here is a photo of my JDXA with the "synthgraphics" panel overlay
and wooden sides that I created and placed over the red triangle shape.
I love how my JDXA looks now!
Placing the panel overlays were fairly simple.
Looks so great ! Can i ask you how you fixed the wooden sides please?
Thanks !
Re: New Front Panel Overlay coming for JD-XA
@synthgraphics
please, when will be the next overlays available?
would also be another color be possible?
thanks
please, when will be the next overlays available?
would also be another color be possible?
thanks
-
- Posts: 104
- Joined: 23:06, 3 November 2015
Re: New Front Panel Overlay coming for JD-XA
JD Knight wrote:@synthgraphics
please, when will be the next overlays available?
would also be another color be possible?
thanks
Ordering is back up, doing another limited run so please pre-order if you think you'll be wanting one.
Re: New Front Panel Overlay coming for JD-XA
Am currently happy with the factory look, but these do look good. Is that jupiter orange on the JP-8 style bar graphics or more JDXa red? Does it clash with any of the red being close but not red? Did you try the bar gfx in red?SynthGraphics wrote:JD Knight wrote:@synthgraphics
please, when will be the next overlays available?
would also be another color be possible?
thanks
Ordering is back up, doing another limited run so please pre-order if you think you'll be wanting one.
Do they stick up above the surrounding casing by a mm or so? I can't tell from the photos, if so do they risk being damaged and cracked or filled with dust along the edges over the years?
Also do you have anyone in the UK who can stock these then ship them as with shipping + price it's hella expensive in total. Thanks!
Re: New Front Panel Overlay coming for JD-XA
The metal work of the JD-XA is about 0.5 mm taller than the main plastic panel surface. When you attach the overlay, the metal at top and bottom of the panel is still about 0.1-0.2 mm taller, so the overlay fits nicely there and there is no danger of you scratching the edges of the overlays. It is like it was designed for the overlay. Only the bender area overlay comes maybe 0.1 mm taller than the surrounding plastic, so I would not slide my hand too much over its front edge. Taking into account how I use my synthesizers, I will never have a problem. If somebody uses the synth roughly and is a real player, using the bender alot while leaning against the synth with the same hand, then it could wear out together with the natural wear of the synth's corner. There are small gaps between the overlays and close to the borders, and naturally they will start gathering a little bit dust, but it can be cleaned off. Much smaller issue than what the stock dust gathering surface has.
Re: New Front Panel Overlay coming for JD-XA
Thanks for info!F5D wrote:The metal work of the JD-XA is about 0.5 mm taller than the main plastic panel surface. When you attach the overlay, the metal at top and bottom of the panel is still about 0.1-0.2 mm taller, so the overlay fits nicely there and there is no danger of you scratching the edges of the overlays. It is like it was designed for the overlay. Only the bender area overlay comes maybe 0.1 mm taller than the surrounding plastic, so I would not slide my hand too much over its front edge. Taking into account how I use my synthesizers, I will never have a problem. If somebody uses the synth roughly and is a real player, using the bender alot while leaning against the synth with the same hand, then it could wear out together with the natural wear of the synth's corner. There are small gaps between the overlays and close to the borders, and naturally they will start gathering a little bit dust, but it can be cleaned off. Much smaller issue than what the stock dust gathering surface has.
Re: New Front Panel Overlay coming for JD-XA
Ordered.. but the site still say's a run in 4-6 weeks? This was a couple of months ago. Are they in stock now?SynthGraphics wrote:JD Knight wrote:@synthgraphics
please, when will be the next overlays available?
would also be another color be possible?
thanks
Ordering is back up, doing another limited run so please pre-order if you think you'll be wanting one.
Thanks Jamie..
Joe
-
- Posts: 104
- Joined: 23:06, 3 November 2015
Re: New Front Panel Overlay coming for JD-XA
Finishing up this batch right now, should all ship out later around July 1st :)Jdoo wrote:Ordered.. but the site still say's a run in 4-6 weeks? This was a couple of months ago. Are they in stock now?SynthGraphics wrote:JD Knight wrote:@synthgraphics
please, when will be the next overlays available?
would also be another color be possible?
thanks
Ordering is back up, doing another limited run so please pre-order if you think you'll be wanting one.
Thanks Jamie..
Joe
Jamie
Re: New Front Panel Overlay coming for JD-XA
Thanks Jamie -
Got your email too. Looking forward to the overlay.
Joe
Got your email too. Looking forward to the overlay.
Joe
Re: New Front Panel Overlay coming for JD-XA
Is it too late to get in on this batch? If so, are there more planned?
-
- Posts: 104
- Joined: 23:06, 3 November 2015
Re: New Front Panel Overlay coming for JD-XA
I still have 12 left of this batch.trrstrl wrote:Is it too late to get in on this batch? If so, are there more planned?
Jamie
-
- Posts: 1
- Joined: 20:04, 8 July 2016
Re: New Front Panel Overlay coming for JD-XA
Will you be making more styles or are you sticking with this one design?
Re: New Front Panel Overlay coming for JD-XA
Thanks Jamie. It looks great. I will post pictures once I have mine "installed".