Guys
Having a tough time figuring out what I thought would be fairly straightforward - I would like to use wheel 2 to control mfx parameters.
I cannot find what CC value should be assigned to have wheel 2 control say delay mix
Any suggestions?
Mod Wheel 2 assignment
Re: Mod Wheel 2 assignment
Answer my own question
1. Assign any CC # to the wheel 2 in program
2. Map same CC # in MFX Matrix
Not sure if TFX can be controlled in similar fashion
1. Assign any CC # to the wheel 2 in program
2. Map same CC # in MFX Matrix
Not sure if TFX can be controlled in similar fashion
-
- Posts: 251
- Joined: 21:51, 12 July 2016
Re: Mod Wheel 2 assignment
If you get to the menu page for Wheel2, and then press the [Enter] button, all of the controls assignable to the Wheel2 will flash. At that point, you can assign anything to Wheel2 by simply moving any blinking control.
Re: Mod Wheel 2 assignment
I tried this - however it did seem to work for TFX control even though they do blink.