TFX 1 and 2 CTRL parameter bug

Forum for the JD-XA.
Post Reply
Redrain68
Posts: 85
Joined: 19:33, 20 September 2015

TFX 1 and 2 CTRL parameter bug

Post by Redrain68 »

Someone can confirm this little bug :
try to preess Exit and move the controllers on the panel, all are ok but the TFX1 CTRL knob show the value "0" on the display but this is not the value memorized in the patch.

Re instaled firmware 1.5
performed a factory reset

the bug is steel here

if i go in the menu (so without use exit+move knob) I see the CTRL value zero but the FX is present....

the problem is only with the CTRL and not with the Select knob.

please i'm going crazy
Post Reply