im trying to make a sysex string fro m the a-01 controller to the itnernal A-01 synth' decay: i have the routing assigned well: i test with Controller mode cc77 for cutoff of internal synth
tried these string:
F0 41 10 00 00 00 IB 12 00 1A 00 F7
AND
F0 41 10 IB 12 00 1A 00 F7
ANYTHING WRONG, OR DOES THE A-01 ONLY ACCEPTS SYSEX DUMPS ?
A-01 sysex string
Re: A-01 sysex string
The syntax for a JU-06 is:
F0 41 10 00 00 00 1D 03 00 PM PL DM DL CS F7
With:
1D = JU-06 put 1B for the A-01
PM = Parameter MSB
PL = Parameter LSB
DM = Parameter value MSB
DL = Parameter value LSB
CS = Checksum
F0 41 10 00 00 00 1D 03 00 PM PL DM DL CS F7
With:
1D = JU-06 put 1B for the A-01
PM = Parameter MSB
PL = Parameter LSB
DM = Parameter value MSB
DL = Parameter value LSB
CS = Checksum
Re: A-01 sysex string
tnx but i need a real life string (for instance decay setting ). i found this one as well.
Re: A-01 sysex string
There doesn't appear to be much in the way of CC control for the A-01.
You can issue a SysEx message of the following form to change internal settings. There's a very long list of these. Just about every capability of the A-01 can be updated this way.
Full Message:
F0 41 10 00 00 00 1B 12 00 00 00 00 06 0E 00 04 00 02 00 00 01 40 3F 06 04 00 00 00 00 00 00 00 00 00 00 00 00 00 5C F7
Breakdown:
1 2 3 4 5 6 7 8 9 A B C D E F 10 11 12 13 14 15 16 17 18 19 1A
06 0E 00 04 00 02 00 00 01 40 3F 06 04 00 00 00 00 00 00 00 00 00 00 00 00 00
1 -> 2
06 | 0E = 6E = 100 : System Tempo
3
00 = Auto : Midi Clock
4
04 = 5 : LCD Contrast
5
00 = Off : Auto Off
6
02 = 10Sec : Eco Mode
7
00 = Off : Bluetooth LE
8
00 = Touch : Key Velocity
9
01 = Normal (Medium) : Velo Curve
A
40 = 0 : Master Tune
B
3F = 0 : CV Scale
C -> D
06 | 04 = 64 = 0 : CV Fine Tune
E
00 = Off : Bluetooth LE Name
F -> 1A
reserved
You can issue a SysEx message of the following form to change internal settings. There's a very long list of these. Just about every capability of the A-01 can be updated this way.
Full Message:
F0 41 10 00 00 00 1B 12 00 00 00 00 06 0E 00 04 00 02 00 00 01 40 3F 06 04 00 00 00 00 00 00 00 00 00 00 00 00 00 5C F7
Breakdown:
1 2 3 4 5 6 7 8 9 A B C D E F 10 11 12 13 14 15 16 17 18 19 1A
06 0E 00 04 00 02 00 00 01 40 3F 06 04 00 00 00 00 00 00 00 00 00 00 00 00 00
1 -> 2
06 | 0E = 6E = 100 : System Tempo
3
00 = Auto : Midi Clock
4
04 = 5 : LCD Contrast
5
00 = Off : Auto Off
6
02 = 10Sec : Eco Mode
7
00 = Off : Bluetooth LE
8
00 = Touch : Key Velocity
9
01 = Normal (Medium) : Velo Curve
A
40 = 0 : Master Tune
B
3F = 0 : CV Scale
C -> D
06 | 04 = 64 = 0 : CV Fine Tune
E
00 = Off : Bluetooth LE Name
F -> 1A
reserved
Re: A-01 sysex string
tnx the string is a bit overwhelming.. i wanna change the octave of the internal synth with one of the knobs
Re: A-01 sysex string
This is the sysex message for the decay, you missed the '00 20' user patch bytes,
and I know, it ain't that easy,,
F0 41 10 00 00 00 1B 12 00 20 00 1A mm CS F7
The A-01 pops up a window: "receiving bulkdump" when the messeage and checksum is correct
I asked Roland.be to ask if they still can add the pitch bend range setting for the 8 bit osc,
Regards
StephenM
and I know, it ain't that easy,,
F0 41 10 00 00 00 1B 12 00 20 00 1A mm CS F7
The A-01 pops up a window: "receiving bulkdump" when the messeage and checksum is correct
I asked Roland.be to ask if they still can add the pitch bend range setting for the 8 bit osc,
Regards
StephenM
Re: A-01 sysex string
ok tnx! but this seems a dump paramter, so unfortunately no realtime ?!
Re: A-01 sysex string
Yes,, mm is de data value, cs is the checksum,,
I think the A-01 can handle this, as control panel/device
That are the four Sysex Settings to assign to a knob
I need to see whats the mm and cs in real live on the A-01
mm and cs are just the data (the value You wanne give the decay) and cheksum
what You need to know are the bytes before it
and that is: F0 41 10 00 00 00 1B 12 00 20 00 1A
I think the A-01 can handle this, as control panel/device
That are the four Sysex Settings to assign to a knob
I need to see whats the mm and cs in real live on the A-01
mm and cs are just the data (the value You wanne give the decay) and cheksum
what You need to know are the bytes before it
and that is: F0 41 10 00 00 00 1B 12 00 20 00 1A