Midi Driver conflict

Forum for boutique synths
Post Reply
rcraven
Posts: 629
Joined: 14:36, 9 September 2007
Location: Melbourne Australia

Midi Driver conflict

Post by rcraven »

Hi
I'm trying to help someone with 2 Boutique synths. He says the two installed Midi drivers have the same name "Boutique" so he can't distinguish between them.
It this true?
Can you install the drivers so they have a unique name ?

Thanks for the help
Royce
User avatar
cloudburst
Posts: 181
Joined: 20:00, 11 November 2015
Location: Northern Ireland
Contact:

Re: Midi Driver conflict

Post by cloudburst »

rcraven
Posts: 629
Joined: 14:36, 9 September 2007
Location: Melbourne Australia

Re: Midi Driver conflict

Post by rcraven »

Thanks CB.
I am amazed that you guys have let Roland get away with this.
The USB driver should interrogate the device and discover what it is and apply it's name to the driver Name.
Boutique-JP8 or Boutique-JX3 or even Boutique_1 and Boutique-2.

Even Behringer has a single Midi USB driver for all their Midi devices and if you have two BCR2000s it will call the Midi Ports as BCONTROL_1 and BCONTROL_2.

With so many of these add-on synths it is bizarre that they should release such a poor driver.

Time to speak up.

Royce
Post Reply