Se-02 pitch problem
Se-02 pitch problem
My Se-02 starts to detune quite a bit when I play higher notes. The oscillators can be finetuned well in the lower notes, but as I move up the keyboard they detune more and more! Anyone else experiencing this? Bug thatvwill be sorted? I’m on the latest firmware.
- rsaintjohn
- Posts: 265
- Joined: 02:56, 23 May 2015
- Location: Cleveland, OH USA
Re: Se-02 pitch problem
I believe that the instructions for the 1.05 firmware skipped steps that should be taken after installing the firmware. Someone on Facebook asked about this, followed the instructions I gave them, and it fixed all of their issues.
Now that you've installed the firmware:
Perform a Factory Reset:
1) Power on while holding “Button 1”, then press the green Manual button
2) When the reset is finished, power off and then back on again
Perform Tuning Calibration:
1) Switch to Patch Mode
2) Hold Transpose and push in the Value Knob; push the Value Knob again to start calibration
Try that, see if it helps. It did for me and I know it worked well for that other guy
Now that you've installed the firmware:
Perform a Factory Reset:
1) Power on while holding “Button 1”, then press the green Manual button
2) When the reset is finished, power off and then back on again
Perform Tuning Calibration:
1) Switch to Patch Mode
2) Hold Transpose and push in the Value Knob; push the Value Knob again to start calibration
Try that, see if it helps. It did for me and I know it worked well for that other guy
Re: Se-02 pitch problem
Thanks, solved my problem!