Se-02 pitch problem

Forum for boutique synths
Post Reply
domiag
Posts: 6
Joined: 20:40, 25 September 2017

Se-02 pitch problem

Post by domiag »

My Se-02 starts to detune quite a bit when I play higher notes. The oscillators can be finetuned well in the lower notes, but as I move up the keyboard they detune more and more! Anyone else experiencing this? Bug thatvwill be sorted? I’m on the latest firmware.
User avatar
rsaintjohn
Posts: 265
Joined: 02:56, 23 May 2015
Location: Cleveland, OH USA

Re: Se-02 pitch problem

Post by rsaintjohn »

I believe that the instructions for the 1.05 firmware skipped steps that should be taken after installing the firmware. Someone on Facebook asked about this, followed the instructions I gave them, and it fixed all of their issues.

Now that you've installed the firmware:

Perform a Factory Reset:
1) Power on while holding “Button 1”, then press the green Manual button
2) When the reset is finished, power off and then back on again

Perform Tuning Calibration:
1) Switch to Patch Mode
2) Hold Transpose and push in the Value Knob; push the Value Knob again to start calibration

Try that, see if it helps. It did for me and I know it worked well for that other guy
domiag
Posts: 6
Joined: 20:40, 25 September 2017

Re: Se-02 pitch problem

Post by domiag »

Thanks, solved my problem!
Post Reply