How to get A300 Pro to transmit on 5-DIN MIDI port [SOLVED]
Posted: 06:57, 11 December 2016
I've been on this for several hours now so I'm obviously missing something basic.
Setup:
- A300 and MKS-30 are both second hand but new to me
- A300 Powered via USB
- MIDI cable plugged into MIDI out of A300
- Then plugged into MIDI in of MKS-30
- A300 set to MIDI channel 1
- MKS-30 set to MIDI channel 1
But nothing transmits - I've tried:
- Triggering MKS-30 with GI-20 Guitar module which works
- OMNI mode on A300 (suggested for other issues, not sure what it does)
- Factory reset of the A300
- A300 sucessfully transmits MIDI via USB connected to Logic Pro X
- A300 shows velocity on LCD when keys are hit
I'm not familiar with 5-DIN MIDI setup (have basic USB MIDI & DAW knowledge) so sorry if this is easy.
Any helpwould be much appreciated.
Cheers
Ben
Setup:
- A300 and MKS-30 are both second hand but new to me
- A300 Powered via USB
- MIDI cable plugged into MIDI out of A300
- Then plugged into MIDI in of MKS-30
- A300 set to MIDI channel 1
- MKS-30 set to MIDI channel 1
But nothing transmits - I've tried:
- Triggering MKS-30 with GI-20 Guitar module which works
- OMNI mode on A300 (suggested for other issues, not sure what it does)
- Factory reset of the A300
- A300 sucessfully transmits MIDI via USB connected to Logic Pro X
- A300 shows velocity on LCD when keys are hit
I'm not familiar with 5-DIN MIDI setup (have basic USB MIDI & DAW knowledge) so sorry if this is easy.
Any helpwould be much appreciated.
Cheers
Ben