Expression pedal: Turn off for 1 Part of a Performance??

Forum for Juno-DS and XPS-30 keyboards
Post Reply
AaronPDX1
Posts: 162
Joined: 17:58, 8 May 2017

Expression pedal: Turn off for 1 Part of a Performance??

Post by AaronPDX1 »

In System settings the control pedal is set for EXPRESSION.

I thought by disabling the EX parameter in Performance Edit for one part, I could disable the pedal affecting that part. No dice. I even tried turning off ALL the MIDI parameters for the part (as described on p 20 of Parameter Guide) and I still get modulation when I hold down the control pedal.

Is there somewhere else I need to disable this, or is this a bug?
AaronPDX1
Posts: 162
Joined: 17:58, 8 May 2017

Re: Expression pedal: Turn off for 1 Part of a Performance??

Post by AaronPDX1 »

For the curious reader, it turns out this is controlled via Matrix control settings within the patch.
AaronPDX1
Posts: 162
Joined: 17:58, 8 May 2017

Re: Expression pedal: Turn off for 1 Part of a Performance??

Post by AaronPDX1 »

Well, as it turns out the Matrix control doesn't turn it off for every patch. I'm not sure why the Wurly patch i'm using still is getting modulation from the pedal, when i've turned off all the matrix controls... Anyone?
frank123
Posts: 72
Joined: 17:38, 24 September 2015

Re: Expression pedal: Turn off for 1 Part of a Performance??

Post by frank123 »

AaronPDX1 wrote:Anyone?
Unfortunately not, we had a similar problem with the Di: viewtopic.php?f=35&t=37906

Frank
AaronPDX1
Posts: 162
Joined: 17:58, 8 May 2017

Re: Expression pedal: Turn off for 1 Part of a Performance??

Post by AaronPDX1 »

Thanks for your reply, Frank. I'll have to look into this a little later and will report back.
Post Reply