Mainstage + Juno DS

Forum for Juno-DS and XPS-30 keyboards
Post Reply
skymatrixsound
Posts: 2
Joined: 23:04, 18 April 2016

Mainstage + Juno DS

Post by skymatrixsound »

Hi all,
i found this on PDF manual:

Using the JUNO-DS with DAW Software Using the JUNO-DS As an Audio Interface
The JUNO-DS’s audio output you’ve specified can be recorded into DAW software
on your computer.
Sound from your computer can also be reproduced from a device that’s connected
to the JUNO-DS’s OUTPUT jacks.
1. Connect the JUNO-DS to your computer.
2. Start up your DAW software, and choose “JUNO-DS” as the audio input
device and output device.
For details on how to make this setting, refer to the owner’s manual of your DAW
software.


I would buy Juno DS 88. I would connect Mainstage and Juno DS using an USB cable. I would transmit digital audio from Mainstage to Juno DS and then i want that the mixed audio (Mainstage+Juno DS) going to the Juno's phone out. Is it possible ? Thanks, sKy.

I can't try because i don't have Juno DS ^_^

20.04.16 News:I have ordered JUNO DS 88, the vendor tell me that the keyboard connected with USB cable to PC or Mac works like an external sound card. I have download the driver from Roland site. I will check the latency connected with Mainstage. Thats all folks.
skymatrixsound
Posts: 2
Joined: 23:04, 18 April 2016

Re: Mainstage + Juno DS

Post by skymatrixsound »

5÷6 ms latency with Roland driver
o carl
Posts: 56
Joined: 20:58, 25 November 2016

Re: Mainstage + Juno DS

Post by o carl »

is it possible to use a wav.recorder for example zoom h4n like a external sampler and load sample to juno DS. then it would be possible to record performance on h4n and load juno DS with that wav-file to its sample pad. and record performance number 2 and mix again like a sequencer.
Post Reply