Hi,
I am beginner
i loaded from axial the preset bank a,b,c,
They are jxl files.
Can somebody tell me how To install them on
The Juno ds88?. I could not find out if i have to
Put them in the root on USB,
And which button to press.
Thanks
axial.roland preset bank
Re: axial.roland preset bank
Use the librarian.
As you see on the site http://axial.roland.com/articles/xv-508 ... et_bank_c/ its is written This is a dedicated download button for JUNO-DS Librarian. Please get Librarian software from this link.
As you see on the site http://axial.roland.com/articles/xv-508 ... et_bank_c/ its is written This is a dedicated download button for JUNO-DS Librarian. Please get Librarian software from this link.
Re: axial.roland preset bank
if you download any other EXP-collektion you get pdf instruction inkluded. like this example:
Thank you for downloading "EXP-01 Dance Trax Collection" for the JUNO-DS61/JUNO-DS88.
This data contains the following number of Patches, Waves, and Drum Kits.
361 Patches
16 Drums Kits
829 Waveforms
+ Contents
1. EXP01.bin
This is the wave expansion data for the JUNO-DS61/JUNO-DS88.
2. SoundList_EXP-01_DS_je01_W.pdf
This is the sound list.
3. EXP-01_DS_Readme_e.txt
This is the file you're reading.
+ Usage
1. Copy the downloaded file (EXP01.bin) to the root directory of the USB memory.
2. Plug the USB memory into the MEMORY connector.
3. While pressing the [NUMERIC] button, turn on the power.
4. The Wave Update Mode will be activated and the screen will display the wave expansion data (e.g. EXP-01).
5. Select the wave expansion data and press the [ENTER] button.
6. When the screen displays "Are you sure?h press the [ENTER] button to load the sounds.
If you would like to start over, press the [EXIT] button.
7. When the JUNO-DS is loading the sounds, "Writing..." will be displayed on the screen.
It will take approximately five minutes to load the sounds.
When the JUNO-DS is done loading the sounds, "Complete" will be displayed on the screen.
8. Reboot the JUNO-DS.
* If for any reason JUNO-DS stops loading the sounds or "Error"
is displayed on the screen, please follow the instructions from the beginning.
There are two ways to select the sounds.
- Point the cursor to the BANK (e.g. DS, PRST), and then select EXP with the Value dial.
Next, point the cursor to the BANK number (e.g. 0001), and select EXP sound with the Value dial.
- Point the cursor to the category number (e.g. Pf:001, Ky:001), and press the [ENTER] button and select EXP.
+ Copyright
Copyright to this data and the accompanying documentation is the property of
Roland Corporation.
+ Disclaimers
- This sound data is provided as after-sales service for the JUNO-DS61/JUNO-DS88.
- Roland Corporation accepts no responsibility for any damages that may arise from
the use of this data.
Date: September.15, 2015
Thank you for downloading "EXP-01 Dance Trax Collection" for the JUNO-DS61/JUNO-DS88.
This data contains the following number of Patches, Waves, and Drum Kits.
361 Patches
16 Drums Kits
829 Waveforms
+ Contents
1. EXP01.bin
This is the wave expansion data for the JUNO-DS61/JUNO-DS88.
2. SoundList_EXP-01_DS_je01_W.pdf
This is the sound list.
3. EXP-01_DS_Readme_e.txt
This is the file you're reading.
+ Usage
1. Copy the downloaded file (EXP01.bin) to the root directory of the USB memory.
2. Plug the USB memory into the MEMORY connector.
3. While pressing the [NUMERIC] button, turn on the power.
4. The Wave Update Mode will be activated and the screen will display the wave expansion data (e.g. EXP-01).
5. Select the wave expansion data and press the [ENTER] button.
6. When the screen displays "Are you sure?h press the [ENTER] button to load the sounds.
If you would like to start over, press the [EXIT] button.
7. When the JUNO-DS is loading the sounds, "Writing..." will be displayed on the screen.
It will take approximately five minutes to load the sounds.
When the JUNO-DS is done loading the sounds, "Complete" will be displayed on the screen.
8. Reboot the JUNO-DS.
* If for any reason JUNO-DS stops loading the sounds or "Error"
is displayed on the screen, please follow the instructions from the beginning.
There are two ways to select the sounds.
- Point the cursor to the BANK (e.g. DS, PRST), and then select EXP with the Value dial.
Next, point the cursor to the BANK number (e.g. 0001), and select EXP sound with the Value dial.
- Point the cursor to the category number (e.g. Pf:001, Ky:001), and press the [ENTER] button and select EXP.
+ Copyright
Copyright to this data and the accompanying documentation is the property of
Roland Corporation.
+ Disclaimers
- This sound data is provided as after-sales service for the JUNO-DS61/JUNO-DS88.
- Roland Corporation accepts no responsibility for any damages that may arise from
the use of this data.
Date: September.15, 2015
Re: axial.roland preset bank
download userguide from Roland website. there are more, than that single one manual included in the box
Re: axial.roland preset bank
Thank y ou for the reply, i had no Problem with the exp, but i really missed that about the librarian,
I did not found it so clear on the axial page.
I did not found it so clear on the axial page.