Page 1 of 1
midi control to select performance in user section of Juno
Posted: 01:05, 19 January 2017
by Bomi
hey,
does somebody know how i can steer via midi that the juno
1. switches to performance mode
2. jumps to the user section and selects a patch there
I can switch to performance mode and jump to a patch, but its not the user patch unfortunately...
Thx
Beat
Re: midi control to select performance in user section of Ju
Posted: 00:16, 30 January 2017
by Bomi
I have to adjust... It's not selecting a performance but just change something on the part of the selected performance...
i checked the channel setupt in Juno (it's set to 16) and i try to send a program change on that channel but as mentioned, Juno does not jump to the user performance i want....
any Idea what I'm doing wrong?
Re: midi control to select performance in user section of Ju
Posted: 21:21, 1 February 2017
by Bomi
Solved.
The problem had to do with the midi out channel setup. I had "1" for patch and "16" for performances. As soon the Midi Channels matched (i set both to "1") it worked properly.
how to switch to performance mode via midi on the Juno DS
Posted: 00:13, 9 February 2017
by Bomi
Actually,
to have this really solved there is another second issue with this:
Does somebody know how to steer via Midi from external that the roland switches from the patch- to the performance mode?
Thx
Beat
Re: midi control to select performance in user section of Ju
Posted: 16:39, 4 April 2017
by pgreco