Hi,
I just picked up a Juno DS61 and I'm trying to automate all the changes I need for a gig using MIDI through Ableton and I'm having issues.
I figured out how to change factory patches and my user saved patches, but the custom splits and dual patches are saved in perform mode and though I can save them, I can't figure out how to program them to change.
I hope that makes sense. I can automate changes of individual patches using program change, but I can't figure out how to automate split or dual settings I've saved.
Thanks!
Performance program changes via MIDI
Re: Performance program changes via MIDI
You would have to send a SysEx String pls find below from another post i just quoted...
quote
by pgreco » 00:08, 15 March 2017
I got the answer from the folks at Roland. Search for "Sound Mode" in the MIDI Implementation Guide as mentioned above (on page 21).
This can put the Juno DS into any of the following modes:
PATCH , PERFORM, GM1, GM2, GS
These are numbered 0 through 4, i.e.:
PATCH=00
PERFORM=01
GM1=02
GM2=03
GS=04
In the following SysEx message, replace <MODE> with the desired 2-digit code, above.
F0
41
10
00
00
3A
12
01
00
00
00
<MODE>
7E (Checksum)
F7
You can follow the SysEx command with the appropriate MSB/LSB/PC values to switch to the desired patch/performance etc (see the table starting at the bottom of page 1 of the MIDI implementation guide).
pgreco
unquote
rgds
H
quote
by pgreco » 00:08, 15 March 2017
I got the answer from the folks at Roland. Search for "Sound Mode" in the MIDI Implementation Guide as mentioned above (on page 21).
This can put the Juno DS into any of the following modes:
PATCH , PERFORM, GM1, GM2, GS
These are numbered 0 through 4, i.e.:
PATCH=00
PERFORM=01
GM1=02
GM2=03
GS=04
In the following SysEx message, replace <MODE> with the desired 2-digit code, above.
F0
41
10
00
00
3A
12
01
00
00
00
<MODE>
7E (Checksum)
F7
You can follow the SysEx command with the appropriate MSB/LSB/PC values to switch to the desired patch/performance etc (see the table starting at the bottom of page 1 of the MIDI implementation guide).
pgreco
unquote
rgds
H
-
- Posts: 2
- Joined: 21:49, 15 September 2017
Re: Performance program changes via MIDI
Thank you!