Combining waveforms from internal memory and exp boards.

Forum for Juno-DS and XPS-30 keyboards
Post Reply
Rolandgr
Posts: 16
Joined: 07:57, 14 October 2017

Combining waveforms from internal memory and exp boards.

Post by Rolandgr »

Hello,
I am interested in buying Roland DS but I've read somewhere today that it is not possible to mix sounds from the keyboard's internal memory with sounds from the expansion boards (one downloads from the Axial site) nor it is possible to create a single patch by combining the internal waveforms with those from the expansion boards.
Is this true? And if so, does the FA line have the same limitation?
Thank you
AaronPDX1
Posts: 162
Joined: 17:58, 8 May 2017

Re: Combining waveforms from internal memory and exp boards.

Post by AaronPDX1 »

I'm not certain, but this doesn't sound right to me. Using the Multi function, you can layer 2 patches. It shouldn't matter if patch 1 is a stock sound, or a loaded Axial one. Once it's on the DS, it's fair game. You can layer even more using 16 part mode.
joelfan
Posts: 76
Joined: 12:54, 4 April 2013

Re: Combining waveforms from internal memory and exp boards.

Post by joelfan »

Agree with you Aaron, it must be possible.
Leokuma
Posts: 27
Joined: 14:22, 10 July 2018
Location: São Paulo, Brazil

Re: Combining waveforms from internal memory and exp boards.

Post by Leokuma »

It's possible to mix any waveform (including EXP and user multisamples) with any other waveform in a patch or performance.
anotherscott
Posts: 513
Joined: 19:05, 1 July 2010

Re: Combining waveforms from internal memory and exp boards.

Post by anotherscott »

...but remember that EXP waveforms will not be available except when that particular EXP is loaded (and you can only have one loaded at a time).
Post Reply